🚨Products used⤵️ • Klean Strip Premium Stripper to remove the old stain on the top. Linked in my Amazon • Prep sanded with orbital sander 120 and 220 grit • Sprayed Zinsser Bullseye primer with Earlex Spraystation • Paint is a mix or Noble and Backroads, available in our Etsy • Top is a stainwash 50/50 mix of General Finishes Provincial and Graystone • Topcoated with General Finishes High Performance Flat • Hardware linked in my Amazon #furnituredesign #paintedfurniture #homeinspo #homedecor #f

🚨Share🚨 Products used⤵️ 1. Brush on - We use Klean Strip and a basic chip brush. Brush it on liberally and allow it to set for 15 - 20 minutes. Touch up any areas that dry out during that time. Some stubborn finishes may require repeat applications. 2. Scrap off - Use a solvent proof plastic scraper to remove the excess. We use a plastic drop sheet to collect the runoff residue on the floor that makes for easy cleanup. 3. Scrub with water - this is the key trick. Use a scrub brush with water t

Here's how⤵️ 1. Brush on - We use Klean Strip and a basic chip brush. Brush it on and allow it to set for 15 - 20 min. Touch up any areas that dry out during that time. 2. Scrap off - Use a solvent proof plastic scraper to remove the excess. We use a plastic drop sheet to collect the residue on the floor for easy cleanup. 3. Scrub with water - this is the KEY. Use a scrub brush to remove residue. Great for areas that are difficult to sand. You can use After Wash instead of water if desired, but

🚨Save for later🚨Products used ⤵️ • Klean Strip to remove the old finish • 120/220/400 grit progress to finish sand and Sela the grain as much as possible since it will be a raw finish (not recommended on high traffic pieces such as dressers or tables) • Brass keyhole handles from D. Lawless hardware • Teardrop pulls from Amazon buffed with Rub N Buff Gold Leaf to match the handles • William Morris drawer liners linked in my Amazon • Interior was cleaned and refreshed with Howard Restor-A-Finis

🚨Share to inspire🚨 Products used⤵️ • Stripped the top with Klean Strip and finish sanded with 220 grit on an orbital sander • Prep cleaned and sanded the chest with a decreasing cleaner and 220 grit sandpaper • Primed with Zinsser Bullseye tinted to a light gray • Painted with a custom mix of General Finishes Lamp Black and our signature color Backroads • Topcoat with General Finishes High Performance in Flat • Sprayed with Earlex Spraystation • Custom paper from Spoonflower. This was a custom