2019年5月22日 · A problem that takes place in various POWER TILT TRIM units is that a boater will trim the engine all the way up, then attempt to trim it down, only to hear the PTT electric …

If the motor operates, then the problem is a lack of power to the motor (faulty solenoid or relay, bad connections, etc.). Failed solenoids, relays, and corrosion at connections, relay sockets …

2018年8月9日 · You can’t trim your motor for better fuel economy or raise it to avoid damage when trailering. Here are some tips for tilt and trim troubleshooting. The tilt and trim unit allows …

2014年8月17日 · Extensive detailed step by step troubleshooting procedures for the trim tilt electrical system in the service manual. Also has the wiring diagram. Troubleshooting without …

2022年11月5日 · Trim and tilt will not raise and lower, 12/24 inline fuse good, replaced both 12 volt 7493 relays, have power to toggle switch to raise and lower, relays click but will not raise …

If you have installed new relays and the trim/tilt pump motor still won't run, there is obviously a problem with the wiring from the sockets at the base of the relays. Remember this: …

2022年11月29日 · Troubleshooting Basics. If your tilt and trim unit fails to operate, the following steps should help you identify the problem, or at least point you in the right direction. As these …

2016年6月20日 · About two weeks ago I went to take it out and the motor will NOT trim down. It will trim UP. I've removed the screw for fluid and attempted to fill it up, but it still will now go down.

2016年4月14日 · I'm seeing a few sources say you can troubleshoot this by hooking up the tilt trim motor directly to the boat battery, that way you can see if the motor is good first and foremost. …

2008年8月19日 · MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone. You are invited to join our public Boat Repair Forum to seek assistance …