Sep 22, 2017 · Sprinkle generous grout power on top of the caulk (after you flat/level out the caulk. I would take a flat edge, cardboard, spackle knife, anything flat, and lightly press the grout powder into the caulk.Let it set for a day or so. vacuum up the loose grout powder.

Sep 18, 2009 · Hi, I'm new to the forum and have lurking here off and on for a year. The generous tips have solved a few questions but I have something new to me. My convection blower fan has a high pitched noise to it this year. I have an Enviro EF3 pelllet stove and is just a year old last week. Worked well...

Dec 9, 2021 · Finally, I applied a generous layer of cement over the top and all around the bolt, using a gloved hand to produce a tidy smear around the hardware, wiping off any excess with a wet rag.

Dec 7, 2014 · This is the same kit I used, cathedral support kit from Canadian Tire, and it is in fact 14" and a hair wide. I went with generous clearances (overboard to keep missus happy), so my support box is sticking out 3" below the flat ceiling, and the Class A is sticking out 3" below that.

May 10, 2018 · Find the size that fits the gap snug, lay a generous bead of silicone in the gap, then stuff the rod foam in there, working it in so it is recessed from the surface.

Nov 21, 2007 · Be generous on the male side and use very little on the female tapping or the dope will end up floating in your tank. The tru blu will give you a permanent seal that won't dry up and crack.

Oct 5, 2006 · Scrape out all the old refactory cement and apply a very generous amount to the mating surfaces. then re essemble the two parts. With a putty knife and damp rag it is possible to clean off the excessive cement.

Nov 12, 2022 · The Cambridge LE-1 wood stove is a large size stove with a generous sized firebox. With up to an 11 hour burn time, you stay warm even on the coldest of nights.

Dec 28, 2007 · The trick though is to not be overly generous when applying the cement. Rutland says to dampen the surface of the metal to be cemented and to use as little as necessary in the gasket channel.

Nov 24, 2009 · You want a generous bead where the storm collar contacts the pipe. Regular silicone is rated to something like 400ºF. The surface of the class A pipe is not going reach even half that temp. It's fine as long as it is a good grade of silicone.