2011年11月30日 · Hose is built to an SAE spec along with the fittings. Unless you are using Aeroquip hose with Aeroquip fittings, Gates hose with Gates fittings, Parker hose with Parker fittings, you won't get a true match of mfg, so that argument is out the window. There are a few part #'s in the push lock world that carry a 300degree rating.

2017年9月10日 · There are several different grades of pusk lock hose available. Aeroquip AQP is the only type that I've ever used and has had excellent service, but that is probably one of the best socketless hoses available. I hear that the Parker hose is also excellent. Depending on what you have, it may be good to go or it may have been questionable since ...

2010年5月9日 · I just plumbed my whole car with Russels Twist lok hose on Jegs push lock fittings. The #10 was a snap. I used a small piece of Jegs #8 on the return. They say its not for fuel, but guys are using it so I was curious. I will be replacing it soon, it already feels like an old radiator hose. It also went together easy though.

2022年4月9日 · Bought a set of valve covers and I'm going to have -12 fittings welded into them and I need to run a hose from the valve cover to the header. I dont see any -12 hose end to 5/8 or -10 hose barbs. If there were, I could just run a hose from the hose end at the valve cover straight onto the 5/8 nipple on the check valve and clamp it.

2012年2月21日 · Just get a good name brand hose. I used the Summit hose once, and it stretched big time. I ran it along the framerail and it was nice and tight. once fuel hit the line (pump 93) it stretched a good 8-10" over the length of the car. I learned my lesson...

2017年10月9日 · I have been using Fragola Push Lock and fittings for my whole system since 2012 without any issues. -10 feed and return on E-85. Even took out the lines last winter for inspection for cracking, deterioration, etc.

2015年8月4日 · Even the basic push-lock stuff typically carries a burst pressure rating of 250 PSI (which you'll never see in the cooler circuit of an automatic transmission). Using the correct fittings and fitting assembly methods is the key to getting any …

2010年7月8日 · All of our Push Lok hose comes from Parker. But it does not carry an SAE “R” designation, (It is not a low permeation fuel hose). Typically most of our customers get 5-10 years life expectancy out of this hose using todays pump gas. And it has a tendency to permeate some of the gas smell through the hose.

2012年5月7日 · If it were me I would run aluminum tubing for the main length. Any hose is going to deteriorate eventually, so the tubing is both lighter and less that needs replacing periodically. I was very shocked to speak to an engineer at Russell and ask how many years to expect the braided stainless to last. He said 3-5 years.

2010年8月6日 · The highest temp push-lok hose Parker makes is the 836Plus, which has a continuous oil temp rating of 302*. - IMO, there is no push-lok hose that should be used in a race trans application. If you're using the proper push-lok hose and fittings it will fail faster/sooner with clamps than w/o.