A Marman clamp is a type of heavy-duty band clamp; it allows two cylindrical objects to be clamped together end-to-end with a ring clamp. It is sometimes also known as a "Marman ring". It consists of a circular strap with an interior V-shaped groove. Tension is applied to the strap with a threaded bolt and nuts connecting to the ends of the strap.

New marman clamp separation system designs should be supported with an extensive development test program. Benefit: Incorporating information contained in this guideline will increase the reliability of marman clamp separation systems.

Alternative Marman V-Band Clamps: Tube O.D. Service Master Clamp Part No. Adjustable lever over Center Latch Clamp Part No. 1.00″ 55000-100S ** 1.25″

By retaining the proven features of the design, we built an optimized sub-24 inch (61 cm) separation system with high stiffness, low-release shock, and a compact envelope. A “Marman clamp” or “Marman ring” is a generic ring clamp used …

Eaton’s Marman V-Band couplings and flanges connect and seal all types of tubing, piping, ducts and containers. Assembly or disassembly of the compact coupling is a simple operation requiring only a few seconds.

"A Marman clamp is a type of heavy-duty band clamp: this allows two flat cylindrical interfaces to be simply clamped together with a ring clamp. Also sometimes known as a 'Marman ring'. A common use for Marman clamps is their use as a quick-disconnect connector in …

A Marman clamp is a type of heavy-duty band clamp; it allows two cylindrical objects to be clamped together end-to-end with a ring clamp. It is sometimes also known as a "Marman ring". It consists of a circular strap with an interior V-shaped groove. Tension is applied to the strap with a threaded bolt and nuts connecting to the ends of the strap.

A Marman band design was judged to be a reliable and inexpensive approach due to both its inherent simplicity and GSFC’s extensive experience with Marman band separation systems. The major components of the jettison system design are the Marman band clamp/joint assembly, the pyrotechnic bolt cutter, the pushrod/spring assembly, and the structural

Marman clamp explained. A Marman clamp is a type of heavy-duty band clamp; it allows two cylindrical objects to be clamped together end-to-end with a ring clamp. It is sometimes also known as a "Marman ring". It consists of a circular strap with an interior V-shaped groove.

A Marman clamp is a strap tensioned around the interface of two flanges to hold them together. Marman clamps are a standard method for holding two rocket sections together or for holding a payload inside a rocket.