In these bathroom zones an IP rating of at least IP44 is required. In addition, it is good practice to consider the area around a wash basin, within a 60cm radius of any tap, to be considered as zone 2. Zone 3 is anywhere outside zones 0, 1, and 2 (subject to specific limits) and where no water jet is likely to be used. No IP rating is required.

2021年3月18日 · This means that an IP44 bathroom lamp can be installed within a radius of 60 cm around the sink, shower, or bathtub up to a height of 2.25m. But not allowed to fit in inside a shower cubicle or bath. There are varieties of IP44 bathroom Ceiling lights, Downlights, and Pendant lights to choose from.

Zone 1 Bathroom Lights can be used in the area above the bath to a height of 2.25m from the floor. In this zone a minimum rating of IP44 is required. If the fitting is 240v a 30ma residual current device (RCD) must also be used to protect the circuit in this zone.

2024年3月14日 · Learn what IP44 rated lighting is and why it is important to use it in bathrooms. Find out the key considerations and safety guidelines to follow when selecting and installing IP44 rated lighting fixtures in your bathroom.

2023年12月23日 · Above the bath or shower, up to a height of 2.25 metres, fittings must have a minimum rating of IP44. However, using IP65-rated bathroom lights is often recommended for better protection against water jets.

Q: What is IP44, and is it enough for bathrooms? A: IP44 is splash-resistant, making it suitable for Zone 2 but not for areas with direct water exposure like Zone 1. Q: Can I install IP20-rated lights in a bathroom? A: No. IP20-rated fittings lack water protection and are not safe for any bathroom zone. Q: What’s the difference between IP44 ...

The minimum safe rating recommended for bathroom lighting fixtures is IP44. Because IP44 lamps are protected against water splashes, they can be installed near water sources but not directly inside the shower cubicle or bath.

IP rating must protect against water spray from all directions (IPX4/IP44). Zone 2 - This is the area stretching to 0.6m outside of the bath or shower. Outside Zones - (Previously Zone 3, which was removed under the 17th Edition Wiring Regulations BS7671) No IP Rating required.

Any fitting used in this zone must have a minimum IP code of IP44, which means it is protected against water splashing from any direction. It's important to note that if the bathroom has a shower installed over a bath, the area around the bath falls into Zones 1 and 2.

2022年4月19日 · ‘Our bathroom range is IP44 rated and suitable in zones 2, 3 and above,’ explains Niki Wright, founder of Lights&lamps.com. ‘A main ceiling light is recommended and flush lighting usually works best to stay within the zones.