2014年9月18日 · Here's my own personal cheat sheet: 802.11r = "fast roaming" (does handshake in advance, before switching.) 802.11k = "APs tell clients best AP" (If 1 AP has full signal …

ClientMatch takes advantage of the 802.11k capabilities but need to be careful when enabling 802.11r which is not supported by most devices , Apple devices do support 802.11r 3. RE: …

2019年5月7日 · Downloaded Config for WIFI 0 VAP 0 ----- Item Value ---- ----- Advertise 802.11k Capability Enabled Measurement Mode for Beacon Reports active-ch-rpt Channel for Beacon …

802.11k is intended to improve the way traffic is distributed within a network. In a wireless LAN, each device normally connects to the AP that provides the strongest signal. Depending on the …

2014年9月16日 · EDIT: The 802.11k forum post mentions that the problematic clients were IOS devices running lower than version 4.3, so maybe these days it would be OK to turn that …

2015年8月27日 · I'm interested in understanding if Aruba's implementation of 802.11k is supported in multiple controller environments. Essentially the scenario is: client A is associated …

2014年8月13日 · associated to a Virtual-AP profile. For more details on enabling 802.11k profile, see Enabling 802.11k Support on. page 377. Interaction between 802.11k and 802.11v clients …

After reading through the RF recomended settings by aruba yesterday I had enabled profiles on our 4030 controller for 802.11r. We are already using 802.11k on our campus site and on our …

2017年9月27日 · If you must run 802.11k, you must disable quietIE otherwise Intel Chipsets will not work. I have not personally observed any other issues with devices that can run 802.11k …

2018年8月30日 · Hello. When I enable 802.11k, 802.11r and 802.11v my APs starts to reload every 2-5 minutes with "Reboot caused by kernel page fault at virtual address 00040004