2016年7月20日 · Part # 4928594 or 904-7105. Interesting, I get 2 parts when I search on 4928594. One is 119 and its called an "Oil pressure" sensor, and the other is called a "exhaust backpressure" sensor and when I called it was around 80 bucks.

2020年12月2日 · Exhaust pressure sensor PN 4928594 Dodge Cummins 4928594 Exhaust Gas Pressure Sensor Get this Cummins OEM exhaust pressure sensor for your '07.5-'18, 6.7L Dodge Diesel truck instead of a cheap aftermarket part that doesn't provide the same quality.

2017年3月26日 · Question is I found a part number on the sensor 4928594 on the top row and under that is a 0702A number. According to the top number this part is for just about every Cummins diesel made but I'm not sure what the other number is or what it means. Also found something that mentions this sensor has something to do with the barometric pressure too.

2017年5月11日 · Hello everyone, My exhaust pressure sensor is broken at the bottom of the harness plug. This is the sensor on the passenger side next to the thermostat housing where the stainless steel line plugs into the housing.

2023年9月25日 · I noticed while driving the truck I had surging around the 1500 RPM, so I then ordered the Cummins 4928594 sensor. I'm not too sure when it started but I noticed when I first start the truck I get some white smoke and the VGT is constantly cycling.

2022年5月3日 · Hello, I have purchased 2 replacement sensors for exhaust pressure near the thermostat on my 2008 6.7. A Dorman and a Walker brand (1002-1005). Both say they are compatible. Neither one will screw in. Threads look the same. Old one goes in smoothly.I was trying not to by the expensive...

2017年4月20日 · High i have an 08 6.7 cummins efi live. Im having problems with what seems like my turbo surging. At idle the truck seems like its surging and the tone changes. Also does this while driving. The exhaust brake only works sometimes and will come on and off while slowing down. Im thinking its...

2021年2月15日 · Truck( 08 3500, 6.7, egr delete, smarty 6.7 me, 142,000 miles) throwed a code and went into limp mode. cleaned tube, orifice and sensor, cleared code, tried and still defueled, ordered new sensor 4928594, will I need to get the truck reflashed?

2012年10月16日 · Well I replaced the sensor this morning. $100.14 from cummins. Part #4928594 30 miles on the truck, and all is well so far. The high pressure code only came up once. The low pressure just wouldn't go away. Cleared multiple times. I'll keep everyone updated

2019年11月2日 · 2013 RAM manual tranny with Raceme ultra deletes 120k miles My exhaust brake stopped working and while trying to figure that out I checked my exhaust back pressure and it is reading 0 psi the entire time driving. I cleaned the tube and sensor on my truck still at 0 psi, then put a sensor off a...