Repairing a weller soldering station - Page 1 - EEVblog
2018年5月9日 · Re: Repairing a weller soldering station « Reply #2 on: May 09, 2018, 12:52:10 pm » Unless you are buying the 230-110 v transformer anyway I would hold off until you open it up and look for visible damage.
DIY weller WMRP/WMRT soldering station project (open source
2020年7月16日 · I wanted to use a nice set of Weller hot tweezers for small SMT rework but did not want the compatible boat anchor station. I found this open-source alternative that was a fun project by itself and could be built on the cheap too!
New Soldering Station Recomendation Weller VS JBC VS Ersa VS
2016年11月25日 · Re: New Soldering Station Recomendation Weller VS JBC « Reply #21 on: November 28, 2016, 10:19:43 pm » For me going back to ersa, weller or metcal (I have access to and can use all three of them) after using my trusty jbc for more than 9 years would be like saying I was too bored with a ferrari and decided to get a VW for a change.
Weller WMD-3 soldering station. Questions around tools and ...
2024年1月13日 · EternalEngine: No, the Weller WMD 3 supports only 24 V tools up to 150 W. The WMRT (and WMRP) are 12 V tools and work only on select stations.
Weller 921Z Soldering Station - Page 1 - EEVblog
2015年4月5日 · Re: Weller 921Z Soldering Station « Reply #1 on: April 06, 2015, 10:56:49 am » I have not found any information about that model, but here are som general info from Weller.
Soldering Station, JBC, Ersa or Weller (Update: I´ve bought
2023年3月19日 · Not being able to change tips quickly is not entirely true. It depends on which Ersa station you are using. My recommendation would be to go for the 'older' Ersa RDS80 soldering station and the 80W basic tool that can use the 832 / 842 series of tips.
How good is a Weller Soldering Station? - Page 1 - EEVblog
2018年8月13日 · Hi Im looking for a good soldering station for my studies, but I also want it to last more than that. Right now im looking at this weller station, is it to much ? is it appropiate? 1-channel welding station with 70W soldering iron with ergonomic handle and safety support. ESD safe station, heat and iron resistant silicone cable for safe handling.
Weller WESD51 digital soldering station - EEVblog
2015年9月21日 · Re: Weller WESD51 digital soldering station - intermittent failure to turn on « Reply #15 on: May 03, 2016, 12:40:27 pm » Dusting off this crusty topic because I think I know the original cause of the problem - bad grounding.
Weller EC2100M Soldering Station - Page 1 - EEVblog
2023年7月26日 · Re: Weller EC2100M Soldering Station « Reply #7 on: July 27, 2023, 06:56:47 pm » Heating element EC234 has a platinum RTD typ. 20Ω at 0°C, gives RTD roughly 22Ω at 25°C and 46Ω at 350°C/662°F.
Weller WE1010 Stopped working and troubleshoot - Page 1
2019年1月9日 · Hi anyone using weller WE1010 soldering station? I have this unit (my mains is 220VAC 50Hz so I use it with a 220v-110v step down converter) and suddenly it stopped working. So I opened it up and did the following tests: 1. transformer primary side shows 8 Ohm, secondary side shows 0.5 Ohm resistance 2. Secondary Polyswitch and Fuse was good. 3.