Adjustable-Angle V-Blocks Use this block to hold workpieces at precise angles. Adjust the block to the desired angle, then tighten the set screw on the bottom of the block to lock it in place.

Any angle steeper than 60 degrees will start to cause wedging and sticking of the ball in the vee. The most conventional design for a kinematic vee block is a 90 degree included angle. This angle will give good location accuracy, and reasonable load carrying capacity. ( See Figure #2 )

V-blocks should be suitable for the size of the workpiece, made from high-quality, hardened steel for durability, and equipped with necessary features, such as adjustable angles or magnetic v-block, to enhance functionality.

Choose from our selection of adjustable V-blocks, including fixturing tables, adjustable-angle V-blocks, and more. Same and Next Day Delivery.

Features:• For grinding, milling or drilling• Made of hardened and precision ground tool steel• Sides are parallel and vee is central and ground• Central hole is provided for drilling or removing pins• V-Block has four 3/8"—16 tapped holes, two in the bottom and one on each side for angle non-clamping• Dimensions: 3-5/

2018年1月2日 · V-Block is a jig structure which is having True V faces (Grooves) and slots. This is a Cast iron structure. The main purpose of this V-block is to hold the Cylindrical objects in place for marking the centres for further lathe machining. …

Crafted to maximize the accuracy of just about any setup for grinding and milling. This All Angle V-Block is supplied with 3- 3/8"-16 threaded holes so you can easily mount it to fixtures, jig plates or angle plates and hold round stock up to 1-1/4" in the horizontal or vertical positions.

V-blocks position cylindrical and rectangular workpieces during inspection or production. The angled body cradles round workpieces to prevent them from rolling on a flat surface. They also support square stock so it can be milled on a side or corner.

V-blocks are precision tools commonly used to hold cylindrical workpieces during machining, inspection, or marking operations. Made from hardened steel, these blocks are usually square or rectangular and feature a V-shaped groove running along the length of the block.