2020年1月25日 · When I entered the numbers in the probe module in UGS I put in 20mm thickness of probe base, -20mm as distance to probe, with the bit 10-15mm from the probe I …

2020年10月1日 · Now when you remove the probe you should have the exact top of workpiece set at zero. This can be automated with a macro routine which automatically enters the probe …

In using the touch probe module in UGS, I click measure outside corner in the XYZ Tab and it will probe all three axis and retract away from probe. I remove probe from material click return to …

2018年5月4日 · I set the probe module parameters in UGS for probe height of 20mm, a retract height of 10mm, fast probe speed of 100 and slow of 10. I zero X, Y and Z and then initiate the …

2018年5月30日 · This is the second time for no reason UGS pauses ITSELF and refuses to restart (send button). Of course it happens in the finishing cycle. It happened during a lengthy …

2017年10月26日 · Having some issues with both PicSender and UGS when engraving with the laser and would appreciate any tips that board members might have in this area. When using …

2019年1月13日 · Waiting for my M3 to be delivered....until then, I'm loading needed software, 3d printing router mount, etc.

2018年4月6日 · I finally had time to test my power route. I created the test project in v carve. I wanted different kinds of cuts and some tool changes for the test. I think it came out pretty …

2018年3月28日 · Thanks for both responses. Let me go back tonight and setup the way I had it the first time through. It made more logical sense. I may also just make a small circle or …

2019年10月28日 · So not sure what is going on here, however as I am midway through a simple project consisting of a pocket, UGS reports that the controller is offline and stops sending data. …