2018年9月17日 · Lets say train 1 is west bound and train 2 is east bound. Traveling towards each other there is a section of track where its single main. Train 1 gets there first and proceeds …

2019年10月7日 · The green line should then indicate the extent of the Track Circuit Section. If the track is occupied by any rolling stock or locomotive the line will turn red. On a siding or …

2020年1月18日 · The track Circuit Detector is the bit that checks if the section is occupied and must have a unique name. I use them in conjunction with the Enhanced Interlocking Towers …

2023年9月5日 · Hi As mentioned above these are used to detect if a section is occupied by another consist. When setting them up make sure that the first insulator is positioned in front of …

2020年5月9日 · In the accompanying badly drawn track diagram, I'm focusing primarily how to protect the 2-way portion of the branch from cornfield meets while also allowing trains to enter …

2023年11月19日 · The default values for a new track circuit detector are traffic type = any and block type = branch line. As before, the track circuit detector will create a track circuit block …

2018年10月27日 · This means that once a consist has taken control of that path no other consist can set an opposite path through it, therefore no cornfield meets. You will also need to set up …

2024年11月17日 · Simple track specs, all t:ane concrete, all default switch levers, basic signalling with identical signal US 2 04. circuit length around 36 miles, default signal block length 3 miles, …

2021年8月3日 · 1. Replace the tracks with an invisible track (use "Save as" so you don't need to worry about messing your route up). This will tell you if the problem is a rendering bottleneck. …

2024年11月28日 · OK, I will try to tell where it is at. When you add track down below the picture you will see a "?" mark to the bottom right of the picture, then to the left of it is ")l" symbol, this …