2025年2月13日 · A forum community dedicated to Nissan SR20 Engine owners and enthusiasts. Come join the discussion about performance, builds, turbos, modifications, troubleshooting, maintenance, and more!

2007年10月16日 · Correct me if I'm wrong: - The black top from JDM S14 has 58mm throttle body vs 60mm in red top. - The red top has T25 turbo while black top has a ball bearing T28 that spools faster but I don't know whether it flows much better.

2007年1月28日 · What are the mechanical differences between the DE and the DET? My understanding is that it's the same block and head, but the DET has a turbo and different connecting rods/crankshaft to change the throw so it lowers the compression. The pistons are the same, though, right? 370cc injectors...

2004年5月2日 · I have observed that on newly bought used SR20DET engines there is a trend of the engines to have extremly high and low compression test numbers on the same note after the engine has been swaped and ran teh numbers change dramatically, here are 2 examples: My friends U12 SR20DET compression...

2006年3月24日 · Is the wiring the same on and s14 ka24de vs. s14 sr20de? Everything seems pretty cut and dry. I have heard that there is one extra wire on the sr20 but can't remember which one. Does anyone have the sr20de wire diagram? Swapping motors in my 510 and found a diagram that shows the ka24 swap. Any...

2003年10月14日 · Yeah that's what I did. Took off both the exhaust and intake cam shafts to make sure the piston won't hit against the valves and rotated the crank till the piston is at max.

2006年3月4日 · Hey Guys/Gals, It's your local SR20 fan Ameen here. As some of you know, recently I have had some problems with my current engine. To cut to the chase: I recently purchased a newer JDM lowport Roller Rocker SR20DE that a member (ever so kindly) picked up for me. ;). I actually didn't know...

2008年4月13日 · No worries bro.. Nissan saw this problem from the start when building the SR20.. On the front cover/oil pump, there are two tabs that keep the possible slack of the chain from falling down and jumping teeth on the crank sprocket..

2002年6月27日 · well thats sorta correct. the sr20 also has a bleeder plug on the block behind the exhaust manifold. also if you have an early classic like 91-92 you should have a rear bleeder up on the fire wall.

2004年1月21日 · Ok I have searched SE-R.net, nissanforums,and here and can't seem to find out where this is at. My 92 had a JDM motor in it and evidently the yahoo that did the swap didn't connect the wire to the sensor because my gauge doesn't work. This is my first SE-R so I don't really know the location of...