SPA112 problem with transmitting DTMF signals - Cisco Community
2019年11月22日 · That's right, SPA112 doesn't generate a 230ms signal, but if I release a 50ms wide signal and pass through SPA112, the receiver receives a 230ms wide signal. In the analog network without using SPA112, the receiver receives a 50ms wide signal and everything is OK. I have the impression that the signal is changing in SPA112.
The following CUCM administration tasks to prepare the CUCM for connecting a SPA112 are described in detail: 1. Define a CUCM user that will be associated with the SPA112 Line1 2. Define a third-party SIP phone for the SPA112 Line1 3. Associate a Line / DN (directory number) to the previously defined SPA112 Line1 third -party SIP device 4.
SPA112 not picking up DHCP and cant set via IVR
2012年8月17日 · Press #. IVR will shout "zero". But it will not help you as code 100 return DHCP settings od WAN interface - and SPA112 has no one. On SPA122, there are two interfaces - WAN and LAN, IVR codes 1xx are dedicated to WAN interface. IVR codes 2xx are dedicated to LAN interface. There are no WAN interface on SPA112, so 1xx codes are meaningless here.
Solved: SPA112 Registration fails? - Cisco Community
My SPA112(1.3.5 004p) fails to register in varying intervals. When restarting the device everything works fine and the registration works. After some time the Re-Registration starts to fail and sometime I get a registration failed even before the Re-Registration started. My SPA112 is behind a Netgear R7000 Router with SIP ALG deaktivated.
Solved: SPA112 use with Call Manager - Cisco Community
2013年4月1日 · The SPA112 is essentially the same as the Linksys PAP2t adapter. They both use SIP protocol, and can be added to Callmanager, but I don't think the SPA112 is supported in this configuration. I was able to get the SPA112 to work with CallManager by adding it as an Advanced SIP device. That uses more licenses (6 I think).
How to access Cisco SPA112
2021年9月17日 · Hi guys, Quick question. A friend bought a used SPA112 on eBay, but he can't connect to it through the web interface or the IVR interface. I believe the web interface has been blocked though the UI (Screenshot taken from another SPA112): Then, if trying using the IVR, I am being asked for the IVR...
Ring Settings Configuration on SPA112 and SPA122
2019年3月21日 · Furthermore, the ring setup enhances the voice services of the device on the provided phone ports by assigning specific ring tones to the respective voice service in use. The voice services include voicemail or voice messages. This article explains the configuration of the ring settings on a SPA112 or a SPA122. Applicable Device • SPA112 ...
SPA112 1.4.1 (002) Crashing Constantly - Cisco Community
2017年3月22日 · Jan 1 00:00:07 SPA112 kern.warning [17179582.152000] Empty flash at 0x003bd834 ends at 0x003be000: Jan 1 00:00:08 SPA112 daemon.err dnsmasq[149]: failed to load names from /etc/hosts: No such file or directory: Jan 1 00:00:28 SPA112 kern.err [17179605.544000] Created coma thread for processing coma control message
Solved: SPa112 delay before processing call - Cisco Community
2013年5月1日 · Hi. I bought a spa112, and i't work fine, but when i try to call from my ata spa112 to a ip phone (internal extension), i have all the time a delay of 15 seconds before the processing of the call, except if i press # but if i call from a other …
SPA112 with 1.4.1 sr3 wont register on VoIP.ms with TLS/SRTP.
2019年5月11日 · I have the same spa112 with the same 1.4.1 sr3 and also can't connect to voip.ms with tls/srtp. It looks like the spa doesnt want to connect with port 5061. I have this line active on port 5061, and it worked before enabling tls. Here's the spa syslog. 05-12-2019 00:21:42 Local0.Info 192.168.6.251 [1]SIP/TCP Backoff 2000 ms