2010年2月19日 · The goal: Make a low-horsepower PTO for installation on a vehicle (mini-truck) that does not have one. (But DOES have a hydraulic pump). The idea: Take a PTO-driven hydraulic pump (originally used to power a sickle-bar mower) and connect it to the existing hydraulic pump on the mini truck...

2004年11月10日 · I added a PTO pump to my little JD 4100 (apx 18 PTO HP). It was only 10 GPM setup. I used it to power hydraulic attachments on the loader arms that were originally designed for a Toro Dingo. I thought a 5 gal resevoir would be sufficient, but using a hydraulically-driven trencher put a heavy heat load on the hydraulic system.

2010年10月31日 · A pto driven backhoe usually has a completely separate hydraulic system, so a failure that sheds debris will not effect your tractor. And it the backhoe is 3pt hitch mounted, the hoe becomes more versatile than a subframe mounted hoe because you can easily use it on multiple tractors, and with the separate system, you don't even have to worry ...

Sep 18, 2018 / PTO Hydraulic Pump #6 . D. Dave M7040 Elite Member. Joined Dec 10, 2012 Messages 2,756 Location

2010年11月17日 · The bracket bolted to the pto driven hydraulic pump. This stabilized the pump, not letting it twist or back off the pto shaft. But had sufficient clearances to let it wobble or move enough to not put undue or unnatural strain on the pto …

2006年1月12日 · Northern's pto hydraulic pump is single stage and the 21 gpm one requires more hp than the 22 pto hp I have. I think that I prefer the 2 stage Barnes pumps for a splitter. The pto hp is sufficient to run their 28 gpm pump, since it only needs about 16hp, but to develop rated capacity, they need to run at much faster than rear pto speed.

2018年7月21日 · 2) Add a hydraulic pump to the engine, belt driven with an electric clutch that will feed the PTO motor independently. 3) Use a PTO gearbox that runs a shaft all the way to the front from the back. The problem that I also have, is that I want to be able to have the rear PTO and lift arms available to run an airblast sprayer for my orchard.

2012年7月2日 · Here is one of Prince largest PTO pumps, and at 540 it will pump about 21 GPM, and at 1000 rpm, it will pump about 40 GPM, at 2000 psi. Surplus Center - 9.9 CU IN PRINCE HC-P-K11C PTO PUMP CI 1000 RPM

2012年5月11日 · I intend to bolt the bracket to the tractor above the PTO output shaft with 2 bolts into the rear-end housing below the turnbuckle bracket. <rockin> I did some reseach on Muncie PTO's and associated hydraulic pumps for an Allison trans in a Topkick. According to Muncie, the Topkick PTO must be running at 1100rpm at the minimum.

2009年12月6日 · Even if you run it off the mid PTO, it will be less HP than the tractors rated HP, and that will dictate the size of the snowblower that will work well. If a tractor had a dedicated pump for the PTO, say a 10 GPM pump, is will take about 21 HP at 3000 psi. Now, you will have to find a hyd motor that can use this fluid.