How to create overcasting stitches - Video Included - Brother USA
If you sew with the incorrect stitch, the needle may hit the presser foot, bending the needle or damaging the presser foot. 3. Position the fabric with the edge of the fabric against the guide of the presser foot and then lower the presser foot.
How to sew overcasting stitches - Video Included - Brother USA
After adjusting the stitch width, slowly turn the hand wheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. If a problem occurs, your machine may require service.
Stitches are loose on the top and/or bottom - Brother USA
5. Using a scrap piece of material sew out your stitch and adjust the thread tension. If the upper threading and lower threading are incorrect, the thread tension cannot be adjusted correctly, even by turning the upper tension control dial. Check the upper threading and lower threading first, and then adjust the thread tension.
Needle keeps hitting the presser foot/needle plate - Brother USA
4. After adjusting the stitch width, slowly turn the hand wheel toward you (counterclockwise) and check that the needle does not touch the presser foot or the needle plate. 5. If using a twin needle: - Make sure that when you insert the twin needle it touches the needle stopper. Then tighten the needle clamp screw securely.
How to use the twin needle - Brother USA
10. Select a stitch . 11. Start sewing. - Two lines of stitching are sewn parallel to each other. When changing the sewing direction, be sure to raise the needle from the fabric, and then raise the presser foot lever and turn the fabric. Otherwise the needle may break or …
Thread keeps breaking - Brother USA
Follow the steps below if your thread continues breaking. 1. Check the upper thread. - Make sure that the machine is threaded correctly.
Download and install Brother iPrint&Scan - Windows or Macintosh …
Procedure: Brother iPrint&Scan for PC/Mac provides access to printing, scanning, and workflow functionality. The supported function will vary based on your model's specifications and capabilities.
Fabric is not feeding properly (bunching, gathering, or puckering)
Stitch length is not set correctly. Tension is not set correctly. Needle is damaged. Thread is tangled. Combination of needle size, thread size, and fabric are not correct. Feed dogs are lowered. Wrong presser foot is being used. Darning plate is installed. * Spool cap is not installed correctly. * Wrong stabilizer was used. *
How to adjust the stitch length - Video Included - Brother USA
1. Locate the stitch length dial located at the top right when facing the machine. - The higher the number, the longer the stitch. With the 0 setting, material is not fed. This is used when sewing a button. The F-1 range is for making a satin stitch (closed zigzag stitch), which is used for making buttonholes and decorative stitches.
How to install and activate the Stitch Express software - Brother USA
The Stitch Express icon appears on your desktop. When you open the software for the first time, you will be prompted to activate your software. Enter the required information and the activation code to do so. 8. Double click on the Stitch Express Icon on your desktop. 9. Fill in the required activation information in the appropriate fields.