Need to find the right nozzle size for your application? Sometimes a simple chart is the easiest way to figure things out. Print it and place it in your sprayer cab.

A spray nozzle chart shows the size of droplets that are produced by each nozzle size at different pressures. This is the only way to ensure that a nozzle will fit into the right flow rate and droplet size range to meet the needs of your application.

Determine the nozzle size by the pressure washer’s GPM @ PSI (gallons per minute @ a speci¬c pounds per square inch). If the nozzle size is too small, your equipment can be damaged.

2024年6月28日 · This is a nozzle chart for the Air Induction Turbo TwinJet Nozzles. You can see that the nozzle capacity (flow rate), droplet size, and GPA is displayed at various pressures: Spray nozzle charts warrant a more detailed discussion to thoroughly understand them.

Nozzle Size Charts. Click on the links below to download a high-quality PDF of each nozzle size chart. U.S. 15” spacings. U.S. 20” spacing. U.S. 30” spacing. Metric, 50 cm spacing. How to Calculate Your Nozzle Size. If you’re not using a manufacturer-provided chart, you’ll need to review a few factors to determine the right nozzle ...

Use the table below to select the properly sized nozzle for your machine. Determine the nozzle size by matching the operating pressure (PSI) of your machine to the gallons per minute (GPM). PRESSURE > L/MIN > HOLES ∅.

Use the flow rate tables provided throughout this guide to select the nozzle and pressure that provides the flow needed for the application. The size and the variation of droplets determine the spray quality that a nozzle produces.

Optimize your spray system with our Nozzle Chart Calculator. Easily determine the ideal nozzle size and spray angle for your specific application. Improve efficiency, reduce waste, and achieve precise spray patterns.

Nozzle (Size) * Number. *A commonly used standard for nozzle size is the “nozzle number” which is equivalent to the nozzle capacity in GPM at 4000 PSI. Spray angle does not affect nozzle flow.

Section: Sizing Nozzles for Pressure. The best way to adjust the pressure produced by a pressure washer is by increasing or decreasing the nozzle orifice size. It is important to know how to use a nozzle chart to accomplish this. On a standard nozzle chart, the top column that runs left to right is the pressure that you want to obtain.