Meraki support/ development has decided not to publish or otherwise document a bug in Meraki dashboard that is affecting SSID configuration of Z1 devices (possibly other appliances). The issue is that the Meraki dashboard is not displaying entire sets of configuration under the "wireless settings" tab. This includes all configuration for SSID.

2023年11月24日 · We have an MX84 at our main site and a Z1 at a different site on a different Network but connected via Site to Site VPN. The units are on a co-termination licence. The Z1 died but have a replacement i can swap it with. I have claimed and added the new Z1 to the inventory and am ready to remove the old Z1 etc to add add the new one to the network.

2024年5月5日 · All this worked correctly when configured. However recently the Z1 failed and was replaced with a Z3, and now they do not work. Trace from a host on the inside LAN times out after 172.17.217.1 the default gateway. Any ideas would be appreciated in case I've fat fingered something, before I raise a Meraki support case. Thanks, Tony S

2017年11月14日 · Hi Which LAN can we use as secondary WAN in Meraki Z1 or Z3 and how? As i have 2 internet up-links and i want when my primary uplink gets down than my secondary uplink starts working automatically. Please expedite support!

2017年9月13日 · The Huawei E3372s-153 is supported by meraki the Huawei E3372h-153 is according the meraki support not supported. When you buy the Huawei E3372 on the package is not visible if you are buying the h / s version (crap 😕). Now we have a working stick (Huawei E367 only 3G), means meraki recognize it but at the moment it is not connecting.

2018年6月25日 · I have quite a few Z1s on networks that should be getting well over 300ms, but they only get 50ms. I have tested a PC in front of a Z1 through the ISP router, and I get 300m+ with the Z1 behind the ISP router I only get 50m. The Traffic Shaping is set to 1000Mb Up and Down. They all have the lates...

2017年8月28日 · The idea of the Z1 is to Auto-VPN back into something larger, It has always been designed to be a SOHO devices and to hang off a larger supported platform, The local breakout was designed to be used as a way of connecting to the ISP that is connected into the office/house without interfering with the corporate network i.e so family member can use the …

2020年3月31日 · Any news on higher throughput on Z1 ? I'm going to 500Mbps now and although fast, these carriers' $%@#$ routers are so bad. Miss all my dashboards and controls from Z series.

2018年10月23日 · The Z1 is downstream from my ISP modem/router serving a 192.168.1.0/24 (Z1 has the address 192.168.1.16) My laptop on the Z1's subnet (192.168.100.X) and I want to view the upstream router's web page (192.168.1.1) When I try to get to that address in my browser, I get a #connection status page for the Z1.

2020年3月3日 · In the case of the MX250 the maximum number of tunnels is 3000, so you should be fine with 800 Z1/3's. Edit: @ww correctly pointed out to me that the maximum recommended number of tunnels for the MX250 is 1000. If your MX is using dual uplinks that means you'll need 2 tunnels per Z1/3. So 800 would result in 1600 tunnels.