Aug 21, 2008 · The purpose of this thread is to give a introduction of the M35A2 Winch. The information has been taken out of the US Army Technical Manuals. Some specs: Max Load 10,000# Cable Length 200 Ft Type of cable 6x9 Fiber Core, Improved Plow Steel (IPS) Check the M35A2 series Technical Manuals for more information on M35A2 winches and operations.

Nov 15, 2020 · Ok, so I clanged the Hydraulic head, and it leaked fuel into the sump. I changed the seals (3) times!..Then found out the supplier conned us with miky mouse rubber seals and charged us for vitron seals. I finally had the right seals in place..Did it start? NO! It drove to where it was. So, Why...

Oct 12, 2010 · M35A2: Manual, various engines, no power steering, dually, (slower unless you get bigger tires) My plan is to either Bob mine or just single it out, mainly I'll just be using it on the road to haul things. I would probably add air seats to it, insulate it more, and try to make it as comfortable as I could. Which engines are the best?

Dec 30, 2009 · I have a 1968 Kaiser-Jeep M35A2W/W. I have the Operator's Manual TM 9-2320-361-10 the tag in the truck says I should have TM 9-2320-209-10 manual my question is what is the difference between the 361, and 209 manual?

Mar 17, 2009 · Dear Fellow Members, I have completely overhauled the brake system on my m35a2. New pads, wheel cylinders, rebuilt booster, new master cylinder, new brake lines, etc. The system is completely dry and the time to fill with brake fluid is here. Dot 5 is expensive as hell and when on the...

Jan 26, 2010 · I own an M35A2 Deuce-n-a-half and saw a posting that someone with the screenname of "carnac" was interpreting the serial / VIN numbers of these vehicles as to when, where it was manufactured and was wondering if anyone can help with mine. The number is as follows: 04C16370032528722

Jan 14, 2008 · My deuce is not charging. Thought it was a bad alternator so I changed it out. still shows that its not charging. Checked the voltage at the back of the unit and its puting out about 23 or 24 volts. I think it should be showing about 26 to 28v. Its a 60 amp alt. My question: is the...

Nov 7, 2015 · That's interesting. On the 87' m35A2C that I got for my Dad, we turned up the main fuel a lot trying to get over the 5 pounds of boost we were getting ( C turbo), and we were only able to surpass that and get up to 14 psi by adjusting the smoke cam, at which point we turned the main fuel back down.

May 24, 2010 · Hello Friends - just bought a clean 1969 M35A2 / Deuce and Half ! I am a Vietnam Veteran ( 1969 to 12970 ) - only markings I seen in Vietnam was the OD with white markings ! I am trying to find the correct size and information on the Markings ! Front Bumper ( passenger to Driver ) II F.F. 32 F 2A15 What size ? 3 or 4inch lettering ?

Dec 18, 2008 · Hello all, first off, I'm a very new M35A2 owner and I would like to thank everyone for the tech info posted up on this site. With a few hours of searching, I was able to answer most of my own questions; thanks for sharing all the knowledge. My question is this: Has anyone attempted to deaden...