2023年10月6日 · I bought a Hornady 366 new and used it for about 15 years with ZERO problems before I decided to give up reloading and sold the machine. I never found it necessary to use the resizing station on the shells that I reloaded.

2007年9月9日 · Is the 366 new? Does it have the new crimp station die body on it? Dusters will not remedy your delima, nor will AAs or Claybusters. The Remington RXP 20 is a help, but not the answer either. Hornady has available a new (actually it's old in design) crimp station die body.

2025年1月1日 · Over the past 3 yrs, I have been acquiring reloading supplies and reloading machines. I have a Hornady 366 12ga and a MEC 9000N 12 ga, one of which will be my primary machine. I also have a MEC 8567N for 28ga and a MEC Sizemaster for 20 ga. I have read some about both the 12 ga machines and...

2017年12月27日 · My friend Steve went to the Tulsa gun show about a year ago, and bought a Hornady 366 20 gauge loader for $380. He tried to get it to work, but no luck...

2013年4月24日 · A few differences to consider: The Hornady primer feed is definitely better than the old 100 primer Mec design. I cannot comment on the newer 200 primer model. It easier to take partially completed shells out (and back in) on the 9000 but can be done on the 366. For a new machine the 366 is going to run $100 or so more.

2009年3月18日 · I'm experiencing a couple of problems with my Hornday 366 Auto. First of all, the Return Spring broke and I can't seem to figure out how to get it back in so that it indexes by itself again. Any ideas on how to get it back in properly? This is the part...

2017年4月19日 · I'm having an issue getting consistent powder drop weights on a Pacific 366. I'm not new to reloading but newer to reloading shotshells. I know minor variances in shotgun reloading are OK but it throwing weights that increase as I get further and further into my routine. For instance, I'm...

2008年12月31日 · My sons and I just purchased a used 366. We ordered the 12ga kit as it was 20 ga. I have pretty much rebuilt the whole thing with ordered parts. I have no docs other than a parts list I got online. I have spent four days and waisted enough shells to …

2011年4月22日 · I just got a hornady 366 last weekend at an auction. It's set up for 28 gauge but comes with all the stuff to convert to 12 and 20 gauge. In the operation manual there isn't much information for this newbie to get brave enough yet to start …

2023年5月16日 · First, hulls made by most manufacturers over the last 3-5 years have been suffering from lack of length control that used to be held by the factories. Remington and Winchester especially so. So, some hulls can be 1/8" longer than others of the same brand. Your experience with wad holder whacking into cases is something lots of 366 users have run into. …