2018年10月24日 · With the exact same heated element on my XT1200 vs DR650/ Stock bars vs aftermarket, on the XT my hands feel like they are burning within a few minutes and I have to turn the grips down or off, on the DR the aluminum bars sap the heat and if its cold I …

2021年1月26日 · I installed the KTM heated grips on mine. Work fine. Over the winter I took my wife's bike out for some exercise. I installed the Oxford heated grips on hers. The Oxfords put out much more heat. On my bike in the 40* I'm at 100% power and ok, but in the 30* my hands are cold. On her bike in the 40* 100% is to hot and I dial it back.

2021年10月10日 · The heated grips were nice to have when I rode through some summer thunder showers. They helped keep my hands warmed against the effect of wet hands in ventilated gloves. No handguards at this time - will likely add some. Handguards + heated grips works better than either by itself.

To that end, I’ve installed Koso Apollo heated grips on the G310 GS. As some inmates had warned me, the stock grips put up more of a fight than I have ever experienced. I’ve installed replacement grips (some heated, some just new) on a lot of motorcycles. This took the cake for a bear of a job. That wasn’t the fault of the new grips, though.

2007年5月3日 · I've the Koso Apollo heated grips on the Ural, and can recommend them without reservation. The low voltage cutoff feature, which is active when the LED on the left grip glows purple, functions reliably and should provide peace of mind for those folks who install the harness's ring terminals directly on the battery and not via a switched connection.

2021年10月10日 · At OP: had good luck with Bikemaster grips and their step up model comes with voltmeter useful to monitor electric load and they outlast bike or at least they did on one of the bikes I had them on. As for riding in cold weather the best combination is to use heated grips on medium + heated gloves or heated glove liners with your favorite winter ...

2011年5月2日 · I installed some heated grips and a another elec outlet on St 1300 monday. I glued the throttle side on per instructions and let it set overnight. I went for a test ride and grips work fine but then the glue cooked and got soft and I lost throttle. I …

2014年2月19日 · I bought heated grips from KTMtwins. Got them installed as per the instructions, and now I cannot find the heated grips in the menu anywhere? Do I have to go to a dealer or something to activate them? Bike is 1290 Super Adventure R. I have to get the bike tonight from the mechanic who did this (smart guy) and it's going to be in the 40's.

2005年5月23日 · Here's how I removed my "hot brand" heated grips one time---without damaging them. But using this method I did have to sacrifice the plastic throttle tube. Hot Grip brand heated grips are $130--I really wanted to salvage them off my bent handlebars. These are epoxied on with 24hr. set epoxy.

2004年12月9日 · I'm using Dual Stars heated grip kit which draws 36 watts and is running through a fused circuit manager. What would be the appropriate amperage fuse...