2023年12月19日 · This tutorial shows you how to set up National Instrument hardware and software to communicate with a GPIB instrument in LabVIEW. Consult the pinout or documentation for your GPIB instrument and make sure you have the correct cables and GPIB instrument control device to connect the instrument to the computer.

Easy-to-understand overview of GPIB communication, explanation of terminology, and basic knowledge regarding GPIB required for programming. What is GPIB? GPIB (General Purpose Interface Bus) was developed as an interface between computers and measuring instruments. It is mainly used to connect PCs and measuring instruments.

I have a Prologix GPIB-USB connected with an Anritsu power meter ML9001a. In the Prologix webpage, it says to communicate with an instrument in Labview, Send ++addr X terminated with Line Feed, where X is the GPIB address of the instrument.

General Purpose Interface Bus (GPIB) or Hewlett-Packard Interface Bus (HP-IB) is a short-range digital communications 8-bit parallel multi-master interface bus specification originally developed by Hewlett-Packard and standardized in IEEE 488.1-2003. It subsequently became the subject of several standards.

2018年3月23日 · The GPIB concept expressed in IEEE-STD 488 made it easy to physically interconnect instruments but it did not make it easy for a programmer to talk to each instrument.

The GPIB‑USB‑HS is an IEEE 488 controller device for computers with USB slots. The GPIB‑USB‑HS achieves maximum IEEE 488.2 performance. With no GPIB cable required for instrument connection, you can use the Hi‑Speed USB port to control up to 14 programmable GPIB instruments.

The GPIB interface, sometimes called the General Purpose Interface Bus (GPIB), is a general purpose digital interface system that can be used to transfer data between two or more devices. It is particularly wellsuited for interconnecting computers and instruments.

The GPIB‑USB‑HS+ is an IEEE 488 controller and portable analyzer device for computers with USB slots. You can use this device to integrate an instrument into your system using GPIB as well as to troubleshoot and solve GPIB hardware and software problems.

The PCI‑GPIB is a plug‑and‑play IEEE 488 interface for PCs and workstations with PCI expansion slots. The PCI‑GPIB can sustain data transfer rates of more than 1.5 MB/s using the IEEE 488.1 three‑wire interlocked handshake.

GPIB is a standardized interface that allows you to connect and control multiple devices from various vendors. Communication is established through a VISA-GPIB object, visadev, which you create in the MATLAB ® workspace.