2007年8月2日 · Pretty good list - BUT - Starboard is a lousy material to use as backing plates. It wil plastically deform (slowly deform) so the bolts loosen and is also not good at spreading the …

2004年12月12日 · Make insert block from any material that allows easy tapping or even better: glue in a nut in the already required location recessed in the bottom. Anchor nuts are the best …

2009年7月14日 · Modern stuff is called Garolite, available in a variety of fibers and resins. CE is cotten cloth-phenolic. G10 is the better epoxy-glass cloth version and very useful in a variety …

2023年8月3日 · In 1948 a Whitstable Shipwright and boat builder Ron Barton establishes R.S.J. Barton Limited. His experience through the war and due to the availability of materials at the …

2021年11月3日 · Of course if you want complex shaped continuous fiber at large scale you have to lay the fiber on something. In a 3D printer this could be a "support material" which is printed, …

2022年1月30日 · True, however you can get G10 tube and other composite tube at McMaster if you like or need it. As you say, pultruded is fine for this application. Also… as you say the …

2022年12月19日 · Main sheet control had a propensity to pull out from the deck, either catch it early and put in an diamond/oval shaped G10 backing plate with the long ends pointing to the …

2024年8月5日 · Interesting. I would think G10 rod is probably pretty strong. Certainly pultruded rod will be strong. One spec I found was 100,000 psi for tensile. Only 20,000 psi for …

2012年11月15日 · I don't know the timeline for all this, but at some point TPI started replacing balsa with a composite material in the way of all through hulls and deck fittings. And at some …

2007年1月9日 · The bond with the G10 center web won't be any worse than had I inserted the shaft when laminating the core halves together. It is NOT going to torque itself loose. A bit of …