Ford 9" width chart? | The H.A.M.B. - The Jalopy Journal
2008年10月19日 · A '58 Ford wagon for instance is 58" flange to flange, if it had 2" drums or 1.5" inch drums it would still be 58". Maybe the wagon has 2" drums and the car has 1.5" inch drums, they use the same rear end.
Ford 9" question, Big or small bearing??? - The Jalopy Journal
2009年3月7日 · Yes, the Small Bearing 9 inch uses the same bearings and brake mounting pattern as the 8 inch. The Small Bearing 9's were much more common than the Big Bearing 9's until later on. I wonder if we made those brackets in the pic. Over the years we have supplied our brackets and stuff to a number of other sellers for their brake sets.
Ford 9inch Brakes - how many different types | The H.A.M.B.
2008年11月9日 · Guys, I know we have several good ford 9 inch diff threads out there, but could we extend it to cover all the different drum brakes & backing plates which is mostly what I am interested in. each time I end up with a diff I am surprised to find small variations in the brakes. I assume there was only 10 and 11 drums, but this may prove me wrong.
Differences between Ford 8inch and 9inch rears? | The H.A.M.B.
2011年11月7日 · The 9 inch Ford housing came both ways, big and little. It just comes down to what backing plates and brakes you want to use and also what bolt pattern wheel you want. The big bearing ends work well if you want to use F1 brakes on the back, everything bolts up and you have 5 on 5.5 wheel pattern.
Technical - Rear axle end play | The H.A.M.B. - The Jalopy Journal
2015年12月20日 · I've got a Ford 9" with late style tapered roller open big bearings. I am converting to disc brakes. The end play/preload is apparently determined by the bearing retainers. The oem bearing retainers were removed and replaced with the caliper mounting brackets, which will now control that end play..
A two speed 9 inch rearend? | The H.A.M.B. - The Jalopy Journal
2004年1月31日 · Sounds more like a sensor for an anti-lock brake system to me. There is a thin wheel attached to the ring gear and a sensor is screwed into the housing to count windows in the sensor ring to determine vehicle speed and whether your rear wheels are turning or sliding...sends a message to the abs brake system ecu and.....well, it ain't a 2 speed.
Technical Ford 9" limited slip identification - The Jalopy Journal
2018年8月23日 · Trying to identify this 9" ford differential. It appears to be a limited slip, but it doesn't have the recessed bolts on the clutch cover. Also 3/4" bolt heads. It tests out as limited slip. Did ford make a cone style lsd at one time. I know it isn't a traction lock or a equa lock. Would like to put for sale, but would like to know exactly what ...
Technical - 9” Rear end identification | The H.A.M.B.
2021年8月16日 · The '57-58 9" housing had drain plugs, those were gone after that. Ford went back and forth on the case/housing fill, with housing fill being more common in trucks for some reason, but certainly not exclusive to them. The smooth back /case fill type was mostly '57-58, but housing fill smooth backs existed into the mid-60s.
Ford Nine Inch Backlash/Depth Question | The H.A.M.B. - The …
2006年5月15日 · Ford Nine Inch Backlash/Depth Question Discussion in ' The Hokey Ass Message Board ' started by DrDano , May 15, 2006 . Joined: Jul 10, 2003
Ford 9" question: The physical difference between open and posi.
2015年4月3日 · All posi carrier for the Ford 9 in that I have seen have the bolts holding the ring gear are counter sunk into the carrier as seen in the SoCalExile video. I have never came across a open carrier this way, the open carrier does not have a machined bolt surface