2020年10月20日 · I recently ran across an ad for a used ESAB Heliarc 352 tig welder. It's an AC/DC welder, that does up to 380 amps. It's a beast of a unit at almost 450lbs, and it's made in the USA. The ad has no mention of a foot pedal, torch, ground, or anything else. I'm looking to getting into tig welding and wondering if this would be a great purchase or not.

2021年1月21日 · Re: Multiprocess welder purchase - Miller vs ESAB vs Everlast I forgot to mention the Rebel AC/DC can fit a 10 to 11 lbs spool of wire. Not quite a large spool but enough wire to get through most work that machine can do in a day.

2013年9月10日 · Re: ESAB Smash welder (MIG) wire feed problem After refitting the wirefeed unit and bolting everything back , the wire voltage is 15v and runs perfectly now for some bizzare reason ! maybe changing all those caps did fix it... even the spot weld function and the self adjust wire speed / power works.

2014年3月29日 · Very little changed on the Migmaster over the years so I suspect the module out of any ESAB Migmaster 250 would work. However, I'd contact ESAB to make sure. Once you start using the Migmaster 250, I doubt you'll want to use the Handler 180 over it. The Migmaster has a very good short circuit transfer arc with C-25.

2024年3月26日 · The ESAB Rogue EM 125 Inverter Based MIG Welder System is designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial grade arc performance and full-featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.

2025年1月3日 · It is an amazing machine. In fact for a few hundred more, go for the Multimatic 255, and get a great stick welder, and a decent DC TIG welder out of it as well. Pulse MIG will change your life with heavier material. But the Miller Multimatic 235 would seem to be a closer match (although not a perfect match) to the ESAB Rustler

2006年12月30日 · Re: Esab Multi Master 260 i would think if it had the circutry for a foot control it would have a cillinoid as well, bummer to have to use the valve on the torch system but i supose its better than haveing to buy a seperatet TIG unit.

2023年6月11日 · A relatively new machine out there that came up was the ESAB Rogue 180i. It specifically has a mode to run 6010 cellulose rod as well as adjustable hot start and arc force/dig. People that had them also had good things to say about their capabilities while running on 120V.

2021年10月27日 · I bet if you had a good wire welder in the shop you'd choose it over the tombstones, you can put metal down a lot faster with them The only Esab MIGs I would spend my own money on would be the AristoMIG 4000i/5000i, they're serious production machines, very nice quality, but maybe a bit big for your needs. I wouldn't touch a Rebel.

2018年9月6日 · Hello, new here and I need some help. I got what looked like a very good deal on an ESAB Migmaster 251. Was told motor was bad on wire feed. Well got it for couple hundred bucks and figured well i can repair this. Plus I had a old l tec -35 feeder that I reworked and got working great after fixing some bad SCRs on the governor board.