2019年3月2日 · So I decided to gather all the information you need and make an easy to follow DIY. Pre-requisites: An LCM that is SW3.6* or newer (though if it's newer, you probably don't feel a need to do this flash). *If you have an SW3.56 LCM, your board is the same as the newer ones, but the CPU is different.

2012年9月6日 · Apparently, you get a tamper indicator dot on your odometer display when you use a used LCM, but that doesn't hurt anything. Search for BMW E46 light switch. The LCM is attached to the switch.

2019年2月22日 · These are the steps you would follow to make sure your new LCM is correctly configured for your car. If you want to go through this we can help walk you through it. It's a pretty complicated process but not too difficult once you have all the software installed and working properly. Of course it may not solve your ultimate problem.

Now offering E46 LCM Firmware Update service. Want to add the famous Triple-Blink functionality to your older E46? Want to add Auto-Lights without the RLS? This firmware will enable those features. Includes coding service to enable installation without the tamper dot. Requires a core LCM of version 3.6 or greater (found in 2003+ cars).

Fully updated to HW4.7 spec and ready to install. This is a used HW 3.6+ LCM with auto lights and fogs. Can be pre-coded to your Vehicle prior to install with customer supplied information. Customer will need to supply VCS/FA and VIN to allow pre-coding, or send in a module (current LCM, EWS, or Cluster) so I can pull the info.

In this video, I recieve a new to me LCM/LKM unit for my BMW 325i (e46). This unit differs from the standard unit found in United States model BMW e46 3-Seri...

2011年3月15日 · If you set the mileage on the LCM to 0, and then set the VIN to match the car it's going into, the LCM automatically pulls the mileage from the cluster. The car than increments the LCM's mileage every 25km after that.

2023年1月26日 · I’m offering you a software update service of BMW E46 light control module LCM SW:3.6 to latest software SW:4.7 CI37. This allows to code front parking lights as DRL - handful if you for angel eyes fitted, 3x blinkers, rear lights on with DRL and some more.

2023年8月21日 · Need some help for the coding part of the lcm/lsz. Obd cable is recognized aan installed correctly, nfs expert and ncs dummy are installed correctly by mike bmw tools installer. No faults when loading in the profile, recognizing the car, changing reading and writing modes, profile settings are also correct when editing the profile.

2004年10月28日 · Crawl underneath and look for the harness leading to the LCM (Light Control Module). Cut open the meshed sheathing and look for the light purple wire with the dark purple stripes. This wire leads to the rear parking light on the driver side.