2010年6月11日 · Re: Anyone have experience with Harbor Freight air compressors? i have had a 20 gal harbor frieght air compressor for 2 years now. trust me wen i tell u spend the extra money. the compresser cant keep up with any air tools. not even impact wrench. just to get the air to flo right i had to conect the hose rite to the regulator box because with the quick disconect on …

2004年7月29日 · Originally posted by droutte:<br /> I just received a new stator and timer base. A warning card states that the timing must be reset<br />after replacement.<br /> If I mark the parts and replace them in the <br />same position, should I still have timing checked?<br /> Also - I have never done this before - any good tips before I start ?<br />1989 Johnson 150 HP <br …

2022年4月19日 · Central pneumatic hvlp. Had a wide fan (almost as wide as it could go), air turned all the way up at the bottom of the gun, and I messed with the fluid knob on a practice sheet which made no difference on the orange peel part. Had the air pressure up to 30psi spraying (max on the gun is 29) and made no real difference.

2005年10月5日 · It's deeper than yours, I think. I did one side of the bow yesterday, which would be about the square footage of that entire aluminum boat. It took an hour and 10 minutes and 125 lbs. of sand, give or take. The blaster is on ebay. It's just a cheapy from central pneumatic, that cost me 140 dollars, including shipping.

2013年11月18日 · Re: Air Filter for Pancake Compressor Agree with finsh cabinet nailing tools, painting (post 3), and using air lines which were had been used with an auto oiler for perviously mentioned items. My sole disagreement was for the comment of "You definitely need a water separator for air tools.

2014年4月14日 · It is over 20 years old. Based on the HF web site they don't have the 1/3 HP motor any more. Smallest is 1/2 HP.

2010年6月16日 · Re: Optimax Air Compressor Questions First get a account @ Promarine to save money on parts as they carry the compressors. I would explain in detail what/could happen to customer and suggest either: A) replace powerhead with reman and new compressor (B) replace compressor and install a 3.0L oil filter feeding upper brg cap and see what happens ...

2013年3月2日 · Re: 90 hp opti max air filter Its a filter for the air compressor. All Optimax/ dfi have the filter, to keep any dirt, foreign objects out of the compressor. It is supposed to be changed every 100 hours. Here is a listing, I don't think these will fit the 90.

2005年1月7日 · Air compressor has 4 main replacement parts, 1. diaphgram, 2. gasket, 3. polyurethane filter, 4. reed plate , AH100 use Stainless reeds and AH101 use nylon. The nylon are far superior and can be made from outboard reedplates. the gasket must be made and the diaphgrams can be cut from diaphgram stock.

2014年3月24日 · OSHA demands professional auto body paint/body shops to stop using any syphon feed guns now and they can only supply 10psi of air pressure to the tips of the HVLP guns...period! That IS the law. But before anybody gets too excited, 10psi at the tip means 30 to 40psi going into the spray guns.