2023年3月14日 · That was an early loader arm design when Bobcat was introducing the G series machines and it was a design that was prone to loader arm cracking, even snapping in half. If you do consider purchasing it, looks at those loader arms closely. As for the Deutz/repower, that's an oil cooled engine and the radiator and piping is designed for that engine.

2011年6月19日 · A '99 873 should have a Deutz oil cooled engine in it. And if you don't know the machine service/repair history, at 2400 hrs, you might save yourself some aggravation by going ahead and replacing the timing belt. If it lets go, gets more [less] interesting. The 873 was a rather big machine, but it's weak point was the loader arms.

2014年7月26日 · 873 has an oil cooled duetz engine. cooling fan is driven off the wheelwheel side of the engine via a belt and angle drive. check to see if the belt is still on the pulleys. typically the tensioner arm pivot gets corroded and sticks with no tension on the belt.

2011年12月20日 · Hello, I'm new to the forum. I am working on a Bobcat 873 skid steer. I am trying to remove the motor and have a service manual to follow. I have gotten to the point where I have to remove the forward motor mount bolts. The left bolt will not break loose. I can only use a stuby wrench on the bottom because of its location and the nut on top is ...

2009年1月9日 · On any diesel engine, the turbocharger doesn't even become a factor until the engine hits somewhere around 16 - 1,800 rpms, and even then, under load. At engine idle, or even high idle, the turbo isn't doing anything, might as well still be in bed asleep. Remember this, for a diesel engine to run it requires three things; 1) air to ignite fuel.

2024年4月18日 · So pulled a stupid move and bought a used Bobcat blindly at auction. Has 2100 hours, but I do not believe it was ever maintained! There is oil EVERWHERE on the inside of the engine and access covers. So far I have changed the lift pump & Gasket, braided fuel lines, fuel shut off solenoid...

2013年9月28日 · If it has the Deutz F1011F engine, you might want to check if the timing belt has failed, front of engine driven by crankshaft. It's behind a cover held on by machine screws, but, unless someone has already removed it, one of the lower screws that hold the cover is a torx plus head, don't recall what size it is.

2010年5月7日 · Today, after 3 hrs working in a raining day, the engine suddently stop , no weird noises, crank but don't start, the traction lock yellow led light is off, but worst with the rain I totally forgot to check the oil level :Banghead before start working with the skid steer, the oil level after the engine stop was empty. It was leaking in the oil ...

2018年1月24日 · I've got a 873 I've owned for a decade, great machine and has giving me no reasons to lie awake at night, until now. She's in my garage up against a wall and leaking oil down the inside of the left rear wheel. I can't get to the wheel. I guessing a axle seal, but thought I'd ask here before I move her.

2015年12月20日 · On my 843 bobcat I had the problem with throttle getting too loose and the speed not staying constant. On my machine there is a 3/8 bolt that goes thru the pivot connection and it controls the tension on the throttle linkage. I tightened mine a little and put double nut on the threads and is fine.