2017年1月5日 · Dark Mode; Light Mode; Menu Log in

2009年11月28日 · I believe that the powder measure is as consistent as the powder scale, which is pretty consistent. Normally, I reload about 100 rounds per session. I use reloading trays and after getting the powder measure set, I fill about 5 cases, then recheck the load on the scale. Sometimes, after about 20 cases, the load will increase slightly, about .05 ...

2017年2月2日 · Like 20 or 25 grs. If that will shoot accurate, and it probably will with a bit of adjusting the powder + or-, it makes a fun squirrel and rabbit gun too. Hopefully you can find some real black powder because it will work much better in that type of gun than Pyrodex will. 3f powder will work a little better in a small bore like that than 2F will.

2012年8月26日 · When setting up my powder measure, I noticed the end of the measure with the nut and down tube removed, fit tightly into the Powder Through Expanding Die. I cut the flare off the down tube and filed the cut end to a thin lip. Although it felt sturdy, I added a set screw to secure the die to the measure.

2023年8月31日 · The Armory. Reloading Room

2014年8月31日 · As with any bargain come bargain accessories. Hermitt here at the forum has a great tutorial on how to make a cap and ball revolver loading stand. Although he uses a beautiful Colt 1860 replica, this same type of stand can be made for just about any black powder wheelgun of your choice. -- Editor Black Powder Cap & Ball revolver loading stand

2021年6月30日 · I had better success with a dipper I made from a 25 case. Pur the powder in an empty case (with spent primer seated), weigh powder and dump, mark with a sharpie where the powder sits and file the case down to that point. Hammer a piece of wire (like a coat hanger) flat and bend around the case, solder in place and you have a custom dipper.

2020年9月15日 · Advanced Search Cancel ...

2013年12月5日 · Black Powder shooters know that traditional formulations of Black Powder leave residues as corrosive as spending time with a politician. They have been using various cleaning methods to remove corrosive residues and heavy powder fouling for a very, very long time. Black Powder cleaning methods include:

2014年1月30日 · For the sides, I had a nice piece of old growth clear redwood 1x8. I cut them to a free form shape and also beveled the edges with the router. I had a short piece of left over leather from a guitar strap that made a handy holder for the copper black powder flask.