2018年8月21日 · Axial leaded components will have a lead or multiple leads coming out of each end of the component. Here are examples of an axial leaded capacitor, resistor, and inductor. Radial which many people think is the shape of the component is actually calling out that the leads are coming out the same side of the component.

2019年5月24日 · Axial components: The axial lead components have one or more leads that lead from the axial ends of the parts. Below are some examples of axial lead capacitors, resistors, and inductors.

2023年8月7日 · Axial lead components have leads from opposite ends of the component body and are aligned along the same axis or in a straight line. This component type is commonly used in resistors, capacitors, diodes, and inductors. The leads are usually straight and can easily be inserted through PCB holes.

An axial lead is connection configuration used on many electric and electronic parts and components designed for through-board or carrier mounting. It locates a part’s leads or wires axially, or in a straight line, with one exiting the component at either end.

2021年1月23日 · The axial lead configuration locates the leads on opposite sides of the component in a straight line, or axially, with the component body. Axial lead configurations are found on a wide range of components including carbon and wire wound resistors, electrolytic capacitors, and diodes.

Axial-leaded components are often considered the most common type of discrete component used in through-hole printed wiring assembly. See Section 6.01 "Through-Hole Soldering, General Requirements", for common accept/reject criteria. The component terminations are …

2018年11月13日 · Axial cans will have a line on one side with arrows pointing to the negative lead, or an indented band that designates the positive lead. Surface mount tantalum chips will have a line and/or a notch on the positive end.

Most standard resistors are commonly produced in an axial lead resistor style. The leads extend out horizontally from the body of the part. These parts are used in thru-hole PCB designs. The leads of this mounting design are bent down for insertion.

Axial Lead Types: The three most common types of axial-lead resistors are carbon composition, or carbon film, metal film and wire-wound: • Carbon composition or carbon film-type resistors are used in general-purpose circuits where initial accuracy and stability with variations of temperature are not considered critical.

2024年5月17日 · An axial lead is connection configuration used on many electric and electronic parts and components designed for through-board or carrier mounting. It locates a part's leads or wires axially, or in a straight line, with one exiting the component at either end.