AES50 is a point-to-point interconnect which carries multiple channels of AES3, PCM or DSD bitstream formats, along with system clock and synchronisation signals, over Cat 5 cable using 100 Mbit/s Fast Ethernet physical layer.

2023年1月14日 · According to one of the developers, it resets the AES50 ports after some time when there is no link, which might help solve some startup issues.

4 All incoming data is also split (output) to FlexLink: AES50 Port A is split to Lane 1 (ch1-64), AES50 Port B is split to Lane 2 (ch65-128) and AUX is split to Lane 3 (ch129-192). The split is not indicated on the LEDs for

2023年2月14日 · It's important not to connect or disconnect two AES50 devices while they are both powered up. It is not a hot-swap interface (though it was probably intended to be). I haven't heard specifics about taking out both ports at once or only one, but the only cure is a new motherboard. Chances are only one device was damaged, pray it was the S16.

2024年2月14日 · AES50 is an open-source audio networking format for multi-channel audio carried over regular CAT5 networking cable. Now, strictly speaking, AES50 isn’t an audio networking format as it’s inherently a point-to-point connection protocol.

2020年2月21日 · I was wondering if anyone has any experience with repairing AES50 ports on the X32 rack. My digital snake got stuck in the “A” port and I had to use a lot of force and wiggling to get the cable out.

2021年4月26日 · The minimum specification for the AES50 cables used to connect stageboxes and consoles is shielded Cat5e. Higher specification cables (e.g. Cat6a, Cat7, Cat8) can also be used provided that they are terminated correctly.

2021年6月14日 · The X32 Rack AES50-B goes to the DP48 AES50-A port. Next you need to configure the output ports of that S16 #2 to start at 9 (it is a config option on the S16). Now your X32 Rack can see all inputs and outputs connected to it.

2019年7月31日 · You can use regular Cat5e for AES50 with an X32 platform and it'll work just fine... right up until it doesn't. Use STP Cat5 with ethercon ends. I doubt the AES50 ports were bad to begin with, to be honest.

2025年2月27日 · While conducting firmware upgrades to the X32, my AES50 port B stopped working. While simulating a FOH (M32) and MON (X32) setup with two S16 stage boxes, the port suddenly quit working. The setup was as follows: S16's connected to the MON (X32) console via AES50 port B on console to Port A on S16.