2015年3月4日 · Cartridge : .35/300 WSM (.35 Sambar) Bullet : .358, 250, Nosler PART SP 44801 Useable Case Capaci: 70.787 grain H2O = 4.596 cm³ Cartridge O.A.L. L6: 2.860 inch = 72.64 mm Barrel Length : 24.0 inch = 609.6 mm Powder : Alliant Reloder-17 Predicted data by increasing and decreasing the given charge, incremented in steps of 2.0% of nominal charge.

2010年12月1日 · Reamer will be from PT&G. Seated bullets in the trial cases with a Hornady .300 WSM die. Didn`t mark the bullet. A machinist friend will hone out a .300 WSM Sinclair body die to .358 for full length sizing. Comparing powder charges in reloading manuals, the .35-300 WSM should be midway in velocity between the .35 Whelen and .358 Norma Mag.

2021年3月24日 · I saved this QL with very limited powder options from somewhere on the web a while ago for 35 Sambar. It may be what you're after. Maybe RL17 will work with 108% load density if you want to compress that much. Cartridge : .35/300 WSM (.35 Sambar) Bullet : .358, 225, Nosler AccuBond 50712 Useable Case Capaci: 68.678 grain H2O = 4.459 cm³

2015年4月1日 · G'Day Fella's, Sorry for the delay in locating this info; These above velocities, are from a 23" barrel. As we all expected, the .35 Sambar is basically a .358 Norma, in a short action! FYI, I'm able to safely get within 150fps out of a shorter 22" barrel, in …

2015年7月11日 · 7mm rem mag has the 7mm wsm 300 win mag has the 300 wsm 270 has the 270 wsm seems to me the 6.5 wsm would have had better ballistics..338 win mag no .338 wsm. even the .223 .243 .25 got a wssm If I was the .338 I would be pissed.

2008年12月29日 · I want it to be a .35 caliber. The calibers I am considering are the .358 STA, .35-.300 Win Mag, and .35-.300 WSM (Sambar). I am currently weighing the cost options. I could build the .35-.300 Win Mag and .35-.300 WSM for a lower cost than building a .358 STA. I would be able to buy either a .300 Win Mag or .300 WSM and just have it rebarreled.

2021年10月12日 · Just finished this 35 WSM. Douglas bbl fluted w/ interrupted flute this was one of my screw ups as I missed an index…oh well, it just went on my own rifle. (thanks Stan for the 1 week turnaround on 6 358 bbls!!!), Win 70 action, McM htg stock with Leupold 2.5-8 mounted.

2006年4月13日 · If you go to 35cal.com you can pull up some information on the 35-300WSM. Seems like it rests between the 35 Whelen and the 358 Norma, and does it out of a Ruger with a 22" barrel. I think he reamed the chamber of a 350 Remington Magnum to make the chambering.

2011年6月8日 · Or, the 35 Sambar, which is basically a .358 WSM! The 350 Rem Mag as mentioned before is a good one too. If I were looking at or looking to build a 20" short mag, non wildcat, it would be the 300WSM. The 300SAUM, which I like even better, wouldn't bother me since I have a good supply of brass already. I bet it becomes scarce in the next few years.

2024年12月24日 · A friend and member here was trying to modify WSM brass. It appears that some brass is a lot harder. I decided to start anew and now have a 14 die bushing set. With Norma brass the old set could take a 458 basic brass to about .200". I started playing with different radius and angles. Pictured...