2018年2月10日 · I'm looking for 5.56 caliber charts for XM193 or XM855, zero'd for 25 Meters and their drop trajectory from a 10.5" barrel. If anyone has a link I'd be appreciative! Posted: 2/10/2018 11:37:54 AM EDT

2011年12月17日 · I have created a series improved 25M zero targets (based of the standard US Military 25M zero target) that will allow the shooter to zero for 50/200M, 100M, and 300M using a 25yd/M range. The different targets are calibrated for both 20" full length service rifles and also 14.5" / 16" carbines with the shorter sight radius.

2014年9月8日 · 25 meter zero with a military M4 zeroing target is what you want for an EOTech. 25 meter zero =on at 300 meters. This is what my EOTech is zero'd at. The correct target makes it easy because 1 box= 1 click of adjustment on the dial. The 65 MOA ring is for faster target acquisition, bottom of ring is where round will impact at 7 meters.

2006年6月25日 · 4. A 200 meter zero has the happy coincidence of an initial trajectory cross-over at 50 yards, a distance available on almost all civilian ranges including many indoor ranges. This makes it easy to achieve a 200 meter battlesight zero …

2012年6月16日 · Best bet is to zero 2" high at 100 yards with the 200-yard setting. Then you will be about right on at 200. Verify and zero at actual distances if at all possible. Then come back to 25 meters, and you'll notice that the little hash between 300 and 400 yard settings is …

2011年3月8日 · The AK 25 yard - 100 yard zero target in .pdf can be downloaded HERE Adjusted 25 yard targets for a 300 yard zero Same instructions as the adjusted 25 yard targets for a 50 yard zero, only these are calibrated to give a 300 yard zero. Again, be sure to confirm your zero at 300 yards given the chance. Example: The AK 25 yard - 300 yard zero ...

2003年1月28日 · Bottom X is for M16A1. Or was. The Army soon found POA using the L(ong range) sight aperture at 25 meters turned into a 250 meter zero with the sight pulled back to the unmarked aperture. I have this target available as a printable .PDF file, but have no place to post it. I can send it by return Email to anyone interested.-- Chuck

2009年8月8日 · You may have minor adjustments at 100 after the 25 m zero. We routinely zero at 25 meters and call it good for pre-mission checks, since often that is all that is available at some staging areas. Posted: 8/10/2009 3:38:03 PM EDT

2017年3月20日 · 25 meter zero is a also a 200 meter zero, depending on ammo. It is difficult to answer the question because of that. If memory serves correct, at a 25/200 meter zero, you should be about 8 inches low at 300. I'm not sure I have ever seen the 300 meter zero as it is getting to the limits of the effective range of most 5.56.

2004年3月8日 · There is a 25 meter zero target out there for the M-68, I think it is on-line, but I would have to find out next week as I am on leave currently. The 25 meter M-68 zero is so that the bullet will strike center mass at 200 meters. Best technique is to mechanical zero with a borelight, proof zero at 25 meters, and confirm at 200meters on KD range.