2021年2月8日 · First, make sure to set your domain name of your local network in the settings. Settings > Networks > Edit > Advanced > Domain Name. Second, make sure to enable mDNS. Settings > Advanced Features > Advanced Gateway Setting > Multicast DNS. The way this works is hostnames can be found in your local network via mDNS.

2023年3月3日 · I'm running UniFi OS UDM Pro 2.4.27 and Network 7.2.97. The Default LAN is currently configured to be 192.168.1.0/24. I need to change it to 192.168.0.0/24. If I go to Networks > Default, the IP address is not editable. I first have to deselect "Auto-Scale Network". I can then change the "Host Address" which automatically changes the range.

2022年12月3日 · I recently obtained a RaspberryPI 4 and saw that it could run the controller, so I installed the UniFi controller and configured it. However, it shows none of the devices on my network. Before I did something irreversibly foolish, I thought it best to inquire about the use of multiple controllers on the same network.

2023年12月20日 · When I click on it it doesn't advance or take me anywhere. (let me clearify this ONLY happens with network servers I cannot click them and remove them, I can click on offline UDM pros and it gives the blurb about removing those but I am specifically needing to remove Network Servers (or software installs only.)

2019年4月28日 · Unifi 24 port PoE is never silent, the fans are ALWAYS on some noise level that maybe unacceptable. The 8 port 150W is fanless, so that could be a better option, even 2 of them for the same price, 16 ports (use a direct SFP connect to save ethernet ports) or say a dumb cheap switch for more ports if you don't need those managed.

2022年8月14日 · Unifi reports the device connected on 192.168.2.1, but I have no traffic working. In the end enabled wireguard, sent config to phone, and boom immediately connected and can get to all my networks fine. Something wrong with the teleport setup I think somewhere in some circumstances, as my setup was a fresh install entirely.

2021年8月23日 · Securing your UniFi Network 2022. Thank you _____ Original Reply: Thanks for this. Unfortunately, I believe Ubiquiti may have changed how guest networks function in network version 7.3.76 as this does not work.

If you're doing regular backups of a VM-based controllers, a full restore will only take 5-10 mins anyway. The unifi controller is also pretty stable on an linux VM and should never give you issues. If you still need true HA, unifi is probably not going to be for you anyway as it lacks a lot of other true enterprise-grade features.

2023年4月25日 · Enable IGMP Snooping and mDNS for both, content filtering off, standard network For the VLAN-Protect, set Option 43 host address to your UNVR or Protect Host IP (which should be on your management VLAN at 192.168.1.xxx) Wifi. Create an IOT wifi network associated with your VLAN-IOT Network.

2023年12月24日 · They connect just fine if I leave the network and connect via cellular network. This started happening day 1 of my Unify network install and never prior. I'd consider myself pretty tech savvy but this issue is throwing me for a loop. Any suggestions? Configs: No Adblock, Firewall is in Auto, no VPN on the network or the clients, no traffic rules.