2007年7月5日 · I just replaced my IAC after getting a D15B swap. I am having a Skunk2 throttle body installed in a couple of weeks (I already have the Skunk2 intake manifold installed with the stock TB, the Skunk TB was on B/O forever), which will completely do away with using a FITV.

2010年6月3日 · ok so i have a 3stage vtec D15B with the right p2j-003 ecu. i've been having major issues with my idle and i want it resolved....and low and behold...

2011年6月25日 · I have looked for a Y8 and a VTEC-E intake manifolds w/ throttle body and cannot find one at my local pick and pull. I can get a manual IACV from Honda and if I could get an adapter plate (if it goes to the throttle body), then just mount it to where the three wire IACV went and then do the two wire IACV trick on the ECU.

2022年2月26日 · honda eg hatch playlist link belowhttps://youtube.com/playlist?list=PLGyWs3qsrez-pSjrk59PJ9uNmR5_U6DOWshare ko nadin yung journey ko sa makulit na idling ng ...

2009年9月26日 · Manual ECU will need 5 wire wideband O2 and 2 wire IACV as opposed to 4 wire narrowband O2 and 3 wire IACV. I personally own a 37820-P2J-003 obd2a Manual ECU for my motor but I reckon maintaining the 2b auto ECU would be a quicker/cheaper route.

2012年6月11日 · Car: Civic 99 VTi Oriel (PK6) Transmission: factory AT Engine: D15B 3-Stage ECU: P2J-J61 (originally meant for a CVT/MMT) Converted (rewired) to OBD2a. Problem 1: the IACV. cant seem to get it to work. have tried 7-8 of them.

2008年3月11日 · I am getting about 33 in the city right now but I think it has to do with my IACV issue that I am working on. The engine came from a CVT model so it has the 3 wire (auto) instead of the 2 wire (manual).

2011年8月11日 · WTK, where is the Idle Air Control Valve(IACV) located D15B. Post by Vin24 » Thu Jun 28, 2012 2:08 am . Guys I hav a Civic 99 with D15B vtech engine i need to know where is the Idle Air Control Valve(IACV) located?? Top. S_2NR TriniTuner 24-7 Posts: 13305 Joined: Sun May 23, 2010 12:11 am.

2008年11月1日 · You can remedy this by either getting the correct ecu because the D15 uses a 2 wire IACV and the D14A4 uses a 3 wire and a 3 wire ecu won't run a 2 wire IACV or you can put the D14A4 throttle body on the D15 intake manifold. It will fit but you have to cover up a small round hole in the corner to make it idle correctly.

2009年2月14日 · The ECU does weird things to the idle when it thinks the IACV is bad. Check your wiring, and maybe try plugging in a known-good IACV.