2020年2月7日 · I'm possibly in the market for a good bang-for-your-buck vintage solid-state power amp. I like my current Jolida 1000p, but the tubes I like are very expensive, and they don't last long. What are some opinions on the Dynaco 400 series? 200 watts per channel, vintage solid-state, pretty cheap used.

2020年9月25日 · Dynaco SS gear is not generally all that well thought of. At least this is true with the Pat 4 and Pat 5 preamps. Most mods of these preamps usually completely gut the chassis and throw a new tube design in the chassis.

2024年5月9日 · Dynaco equipment is like the Model T of audio....mass produced, surprisingly good within limits, easy to repair/restore/modify. I believe that audio, like most hobbies, has a point of diminishing returns, beyond which one has to spend every increasing amounts of money for incrementally smaller improvements.

2010年5月24日 · On the upstairs second system, the Dynaco PAS-3X was taken out and the PAT-4 installed. Paired with the McIntosh MC-250, this could have been a fairly common solid-state system back in 1969! The sound was certainly different than the previous preamplifier as this classic all solid-state combination was faster and had deeper bass.

2017年8月17日 · The other compelling option I have been looking at is a pair of MC30's. They cost about three times as much as the Dynaco option and have half the power. The other benefit of the Dynaco is that at 60 watts, I could use them with a pair of Paradigm Studio 100's I have in storage if I didn't like them better than the Fisher.

2016年8月25日 · the dynaco a 25 do have good solid bass, somewhat loose though. adding a subwoofer to the atc scm7 will add much of the missing weight tbh. if I A-B the dynaco to the atc scm7 + sub, theres not much the a-25 do better except higher spl …

2016年8月25日 · The OLD Wharfedales were very-similar to the Dynacos in terms of the midrange. The ones from their heyday with the cone-tweeters are probably the most-Dynaco-like, oddly-enough, but that's because they used ported/vented designs and alnico drivers. 3. vented (or ported) bass-response with a Dynaco-like sound - Woofer-size may come into play here.

2013年10月6日 · The Dynaco PAT-4 - in stock form - is one of the harsher bits of gear I've heard. I've owned three of them - one back in 1990 as a cheap stand-in for a preamplifier when I was broker than a church mouse.

2017年4月24日 · Dynaco PAS would be the natural partner - also lots of modifications and parts out there for this preamp. A stock PAS - especially with aged parts - can sound rather "tubey" / overly warm, but a new power supply cap, plus coupling caps really helps. I recently built a "new" Dynaco PAS that has all new parts, including the chassis, for ~$500.

2011年2月6日 · Oh, and be careful with that soldering iron, it's way too easy to damage the old Dynaco circuit boards. The green fiberglass ones are somewhat more durable, but the brown phenolic ones are quite fragile, the copper trace will lift right off the board if you're not very quick and very careful when applying heat.