2020年1月7日 · MS250 is a good little saw, but at 6’4” and 400# it should be a 2 finger starter for you. The only thing that could be happening is hydro-lock from leaking carb needle (which could actually only be issue at startup), the notorious failure to hear the ‘pop’ on that model in chocked mode which is flooding the saw, or the timing is too far ...

2015年8月28日 · I will be buying a MS250 or MS251 for my workplace, occasional use "loaner" saw. Loaner means that when it gets wrecked by students/faculty, I will be glad I didn't give them "my" 260's or 362. 250 is $240 and 251 is $260 with educational discount. I'm old school and know the 250 is good for...

2025年2月15日 · A friend brought me his trusted MS250 and told me it quit running and he was unable to get it to start. Not like I'm an expert, but he knows I've fixed 2-strokes in the past. I found it did not make spark, so installed a new Amazon coil. After this it …

2020年6月1日 · Just wondering if anyone has installed a compression relief valve in a stihl 250? Is it possible? Any info or links would be much appreciated.

2006年5月17日 · Stihl MS250 or MS290 or MS270 Hi, first time poster on this forum and alot of good info I've found. However, after searching awile I havn't found a definitive answer to which saw would suit my needs better. I looked at a few Husqvarna's but unfortunately, not …

2022年2月2日 · Depends on what you consider a 'big' tree. I know guys that think 22" is a BIG tree and they rarely mess with stuff over 18" and mostly hang out in the 12-16" range for firewood. For that kind of stuff it would work fine. If you're interested in 30"+ on a regular basis, the MS250 not enough saw IMO.

2010年8月29日 · I managed to mega screw up my almost-new MS 250 to the point where it is hardly worth fixing so I am thinking I maybe should flog it on the net for parts and buy a new MS 251. Are there any differences between the MS250 and the MS251 that I should know about before deciding which way to go?

2013年1月24日 · How do these two saws compare. Weight vs quality. Which would you rather use? • Sent from my screen to yours.

2025年2月14日 · Just FYI- Last time I checked ( this fall) new OEM C1Q-S76 carbs were $35 at my local Stihl dealer. At that price it barely makes sense to try and rebuild the carb. That may become necessary, if I don't manage to get adequate results on the D/G kit. Of course, I live on a very small island in...

2020年10月30日 · I had a MS250 that was given to me because of similar hard pull problems. It would start and run ok but hard to pull through. I removed the spark plug and the recoil area where I could rotate the flywheel by hand.