Connect the speedometer wires as shown in the wiring sections. Secure the speedometer to the dashboard using the provided bracket and hardware. Once the speedometer is mounted and wired into the vehicle, the speedometer should be tested to verify that the electrical connections are work-ing properly.

The speedometer is designed to operate with an electrical speed sender. The speed sender signal range must be between 500 and 400,000 pulses/mile (310 and 248,500 pulses/km).

3. Connect the speedometer wires as shown in the wiring sections. 4. Secure the speedometer to the dashboard using the provided bracket and hardware. Wiring Auto meter Hall-Effect senders (Square Wave) - Models 5291 (standard 7/8-18 thread) & 5292 (Ford Plug in Sensor), 3 wire sender, cruise. Remove cap for cruise control cable, otherwise

Connect the speedometer wires as shown in the wiring sections. Secure the speedometer to the dashboard using the provided bracket and hardware. Calibration (Electric Speedometer calibration made easy!) With the power off, push and hold the Trip/Reset button.

Learn how to correctly wire and install an Autometer speedometer using a detailed wiring diagram. Ensure accurate speed readings for your vehicle.

Cut a 3/8" dia. hole in the firewall for the speedometer wires. Place a rubber grommet in the hole and route the wires through the grommet to the engine compartment. Connect the speedometer wires as shown in the wiring sections. Connect the GPS speedo as shown below.

Learn how to properly wire an Autometer electronic speedometer with a detailed wiring diagram. Get step-by-step instructions for a clean installation.

Once the speedometer is mounted and wired into the vehicle, the speedometer should be tested to verify the electrical connections are working properly. First, watch the speedometer’s pointer as the power is applied.

Learn how to wire an Autometer electric speedometer with this helpful wiring diagram. Step-by-step instructions and diagrams for a seamless installation.

Understand the wiring requirements: Familiarize yourself with the wiring diagram provided by Autometer. This will help you correctly connect the speedometer’s electrical components, such as the power, ground, and sensor wires.