2008年3月12日 · Hi Folks, I can hardly believe, that noone has ever run into a similar situation of having both faults at the same time: 18047 - Accelerator Position Sensor 1/2 (G79/G185): Implausible Signal and 01039 - Coolant Temperature Sensor (G2) 30-10 - Open or Short to B+ - Intermittent) Didn't anyone ever notice if the 18047 Problem stopped reoccuring (the gas pedal gets intermittently disabled) after ...

2022年5月15日 · I am curious though. Is there any reason why that tube would natively bounce around so hard when unsupported and giving it some throttle in neutral? That unfortunately wasn't the only problem. I am getting a P0228 - (Throttle Position Sensor G79) and the car feels like it is building no boost. The RPMs do go up when hitting the pedal though.

2012年4月9日 · 2015 Golf 172K Code P2138 Accelerator Position Sensors (G79)/ (G185)... Ross-Tech notes that the actual problem being related to the Position Sensor is...

2011年2月13日 · Code thrown was VW 18047 ( I forgot the "P" code), anyhow the description was "Throttle position sensor signal implausable". I recalled a while ago (2 years?) someone took their position sensor apaprt and tweaked the little fingers that …

2001年4月19日 · fault codes, 18039, 16764, 17946, 18009, 19586 !!! FOUND IT all this after my main wire going from the control box (on top of the battery) to the starter...

2017年1月16日 · Hi guys, After lerking through this and various other forums about this issue I'm finally posting. A few months ago I bought an AHU swapped MK2 Jetta. Guy I bought it from informed me of the issue where accelerating past a certain point …

2023年10月6日 · The value you may be reading may not be the pedal position. G69 is the throttle valve control module internal position sensor. G79 is the pedal position sensor, and G185 is the secondary pedal position sensor. Some of the time, the actual throttle valve will not ever open all the way, as a substantial amount of the air going into the intake manifold is …

2012年4月9日 · Been dealing with this code for sometime... I replaced the pedal & made it over 1000 miles with no problem but today its back. Mil is on & car goes into limp mode. The VCDS wiki says this code can be wiring or even an 02 sensor. I have some new codes that showed up this time that lead me to...

2024年1月12日 · i have 2 codes p0228 (throttle position sensor) and p0303 (cylinder 3 misfire) this had just started about a day ago after my battery died. Now when i start my car and put in drive it stalls out.

2002年10月28日 · So, if anyone sees a G79 fault code on Vag-Com for Throttle pedal position sensor, P0226, then it is most likely the pedal assembly on the fritz. Jerry (Birdman here) from Impex (x106) is the MAN!