2009年11月28日 · It's no. 21 in table R602.3(1). 3 or 4 toe nails. I've never seen s joist on a ledger strip not toenailed to girder. Ledger strips are no. 28. 3 or 4 nails at each joist. I say …

2010年2月25日 · Re: 2x2 ledger The "ledger strip" is in 2006/2009 IRC; "502.6.2 Joist framing. Joists framing into the side of a wood girder shall be suported by approved framing anchors or …

2020年8月7日 · An acquaintance is claiming that 2"x2" ledger strip nailed to double 2"x10" rim/band joist supporting 2"x8" floor joists is stronger than 2"x8" joist hangers using 10d HDG …

2023年6月4日 · No doubting ya. And there are a lot of structures out there that are doing fine with them or without any ledger strip at all. Having put some time in the historic preservation world, …

2020年8月7日 · Alternatively, the ends of joists shall be supported on a 1-inch by 4-inch (25 mm by 102 mm) ribbon strip and shall be nailed to the adjacent stud. The bearing on masonry or …

2009年10月20日 · A 2x4 ledger nailed hi and lo on a 2x12 girder with unnotched 2x8 joists would be a fine use IMO. The 2x4 would tend to slide down in shear rather than rolling out, there is …

2009年11月28日 · In effect what happens is the band board will work as a girder and with the ledger board as a built-up beam. Could attach the ledger strip or hangers directly to the band …

2022年10月12日 · inspector commented to my contractor building a house that (1), shed roof rafters that are attached to a ledger need to have hangers, and (2), 2x4 ceiling joists at a porch …

2009年10月23日 · pressure blocks do not support the same way a hanger does. it is a carpenters attempt to do what it doesn't. pressure blocking is simply blocking between the joists when …

2020年11月6日 · We're designing a second story addition to a house which will 'bridge' between the existing gable end wall of the house and garage. The floor system of the addition will …