2008年9月17日 · Argon pressure Hi blazehaze69, I use 336 cu ft tank and a full tank is about 2500 psi. I stop tig welding when it gets to about 100 psi just to be safe for my welds and also …

2004年9月7日 · I can tell you that $50.00 CDN, is a fair lease price. I can also tell you that when you fill the 300 cu. ft. tank, it should always be considerably less, per cubic foot of gas, than …

Show Dog, On a small tank like that fill it up with water push the fumes out, drain, and through an inert gas hose which could be Argon, 75/25, co2, or nitrogen, If your tig welding it then argon …

2017年2月28日 · Obviously welding out of a pickup bed is less desirable that off a flatbed, but I haven't got around to building a flatbed yet. I am trying to organize the space and I'm …

Gas bottles (Oxygen, Argon, etc) are ok in any position, but acetylene is better vertical due to the filler. In most of the US, regulations require that all tanks be secured so that they can not …

Argon: 1.78400 (g / l) = 0.111371482 pounds / (cu ft) So 120 cu ft should add 13.36 lbs. And then if you really care (roughly): pressure x volume = some_constant x temperature. The …

If you have an 80cf bottle of gas, and you're regulating it to 10cf/h, then that bottle will last 8 hours. @20cfh, it's down to 4, and so on... If you're starting and stopping a lot, the pre and …

2010年10月2日 · The regulator or flow meter pressures are not super critical. It might help to have a method of containing the argon with the ability to bleed off excess pressure once the tank is …

2010年2月16日 · Argon Moisture. No. Once the gas is in the cylinder whatever is in there is in there. If it's contaminated it was contaminated when the gas provider filled it. Since the …

2007年6月24日 · all the argon and its mixes like C-25 are gas only thats why they are at 4000 PSI to get lots of gas into the small tank. as its only gas it donse not need to be in any perticulare …