The PICkit™ Serial SPI Demo Board was designed to easily connect to the PICkit Serial Analyzer (DV164122).

2018年8月15日 · Motherboard User’s Guide Note the following details of the code protection feature on Microchip devices:

URXD1 UTXD1 PDC1 PDC1 Optical Port SPI1 SPI1_NPCS0..3 SPI1_MISO1 SPI1_MOSI1 SPCK1 PWM PWM0..3 AHB-AP FPU Cortex-M4 Processor (CM4P1) DSPNVIC ICode / DCode busSystem bus

EVB-LAN9252-SPI has been produced to answer our customers' requests for a vehicle to allow evaluation of the LAN9252 EtherCAT Slave Controller (ESC)

Learn about Microchip Libraries for Applications that includes source code, drivers, demos, documentation and utilities.

The SAM 4 MCU product families based on the Arm Cortex-M4 core operate at a maximum CPU speed of 120 MHz and feature up to 2048 KB of Flash and up to 128 KB of SRAM.

Author: Jason Layton, Microchip Technology Inc. The Serial Peripheral Interface (SPI) module is a synchronous serial interface useful for communicating with other peripheral or microcontroller devices. These peripheral devices can be serial EEPROMs, shift registers, display drivers, Analog-to-Digital Converters and so on. The SPI module is compatible with Motorola®SPI and …

1.0 INTRODUCTION This document provides a hardware design checklist for the Microchip LAN9253 2/3-Port EtherCAT® Device controller, which is the third port for flexible network configurations. LAN9253 supports 8/16-bit host bus, GPIO, SPI, and MII inter-face. The device can be configured as a three-port device, providing an additional MII port. This port can be …

INTRODUCTION This application note describes the KSZ Distributed Switch Architecture (DSA) subsystem and how to use the KSZ DSA drivers for a switch application. The design of DSA is to use unmodified network tools such as bridge, ip, and ifconfig to …