2017/2022 Audi A6 Vacuum Sensor G608 LocationBest Car Fixes

2019年8月17日 · I bought a used 2018 Audi S3 last weekend from a Mazda dealership. Had the PPI done by the Audi dealership down the road. PPI came back clean besides "Fault Stored …

Replace the “vacuum hose with non-return valve and pressure sensor – G608” according to the Elsa Repair Manual, Elsa >> Brake System >> 47 Hydraulic Components >> Vacuum System.

2018年6月19日 · With the engine idling, the G608-Vacuum Sensor should be around [-800 to -950mbar] providing there is a decent amount of vacuum at the brake booster. - The value …

2025年3月24日 · Check the vacuum hose, sensor G608, connectors, seals and valves for possible damage. Check for leaks according to ELSA. Check for small cracks in the vacuum …

2020年9月7日 · Just heard back from the dealer: it was a brake booster sensor (they stated G608 but I haven't found it in the parts list for our cars so think it is actually this one). They told me …

2005年2月11日 · The diagrams for both the "8T2" 38-pin ABS module currently in my car and the new "8T3" 46-pin retrofit part list a set of three wires going to "T3di connector" going to …

This condition occurs due to an incorrect sampling rate between the ECM and the G608 Vacuum Sensor. The symptom as described will store the fault 03366 in the Brake Electronics Fault …

2023年1月14日 · Booked it into my local garage who diagnosed the G608 vac sensor on the servo to be faulty. After they played around with it the fault disappeared and we thought it was …

2021年6月28日 · The paperwork states - Defective G608 vacuum sensor requires replacement continuous use may cause further damage To brake system and lead to further cost. The …