2025年1月26日 · The 9.3x64 Brenneke The big boy of 9.3s was designed by German firearms genius Wilhelm Brenneke in about 1910. The 9.3x64 is still as modern as tomorrow. It s a true unbelted magnum; its rimless case has a base diameter of .504 (.034 of an inch thicker than the 7x57 family) with a rim slightly rebated to .492 of an inch.

2005年5月14日 · Does a change to 9.3x64 introduce a host of problems (not just in terms of the rifle itself, but also in terms of ammo and reloading eqpt availability.) - and one further bit of nitty-gritty- I was planning a 22" barrel on a 9.3x62 -presumably a 9.3x64 would benefit from a longer barrel)? Any advice gratefully received! Thanks in advance.

2010年7月6日 · I have shot and owned all three at one time or another..The 375 Ruger is the most practical without a doubt, the 9.3x64 is just a complicated .375 H&H or 375 Ruger for all practical purposes and brass can be a real problem from time to time..The 9.3x62 is always a favorite and seems to suit your needs more than the others as you already have a ...

2013年11月28日 · 2mm doesn't sound like much but the 9,3x64 is a much larger cartridge than the 9.3x62 ever thought of being; just make sure there's room in the CZ action/magazine. Funny enough we had one on the Farm in RSA; a Voere, very nice rifle with blond wood, a real looker.

2013年9月18日 · I have two 9.3x64 Brenneke's for sale. Rifle/bases/rings included. I am selling one and keeping the other. I like them both equally well, and both shoot. The rifle will come with a set of Lyman dies and 80 plus pieces of Buffalo Arms brass. The top one is an Argentine action with half moon barrel, rust blue put together by Guild members. Top ...

2008年6月16日 · 9.3x64 Brenneke - Definitely is on par with the 375 H&H in terms of performance. Brass is scarce and pricey and it's got that funny rim dimension but a fantastic cartridge. 9.3x66 Sako (aka 370 Sako Mag.) - Reaches the lower end of 375 H&H performance. Standard (.30-06) rim dimension and is available in the U.S. now - Sako 85.

2004年12月14日 · With the 9.3x64 Brenneke there is one big plus and one small inconvenience. The plus is that any standard-length action can be used. If a .30-06 or action of that length and bolt face configuration is used, the only alteration needed is to open the bolt face to accept the .496-inch rim of the 9.3x64 Brenneke brass, screw in the barrel and head ...

2017年10月16日 · 9.3x64 Brenneke 8x68 375 Ruger 338 Blaser Mag 338 Edge All of your cartridges will fulfill your need for a relatively accurate, middle range hunting cartridge. The ones I list will will handle slightly heavier bullets and slightly longer ranges.

2010年9月9日 · We had a bear (brown) shot with a .375 Ruger and finished off with a 9,3x64 Brenneke - Proof positive of the inherent, absolute, quantifyable and indisputable superiority of the 9,3x64 Brenneke. The fact that the .375 was placed about liverish and the 9,3x64 into the head had nothing to do with the bears reaction to the shots.

2010年5月13日 · I have had a wildcat which is based on the 9.3X64 for about fifteen years or so. It is a 375 bore with minimum taper on the case and has a 40 degree shoulder. It would safely duplicate FACTORY loads in a 375 H&H, but of course the 375 H&H can be loaded to higher velocities also. I used RWS brass which originally cost me about a dollar a round.